For Corvette C8 2020+ Front Strut Shock Tower Covers With Mag Ride Bright black
Product Description
Please contract us firstly if there are any problems when you received the package. We will definitely give you satisfying solution, please don't leave neutral or negative feedback without any communication.
For Corvette C8 Front Strut Tower Covers
Whether you know it or not, there is an issue with the all new for Corvette C8 2020 that allows water to pool in the front strut towers. The towers are made from aluminum but the strut hardware isn’t and the pooling water causes the top nut and bolt to rust. Our for Corvette C8 Strut Tower Covers provides a simple solution and prevents the water from entering the strut towers. Our covers are made from durable black ABS plastic and look like a factory piece once installed. Installation of our for Corvette C8 Strut Tower Covers can be accomplished in less than 30 minutes with minimal tools.
Customers with front lift adjustable height option (Option code E60): for Chevrolet recently issued a technical service bulletin regarding the reservoir cap leaking. The DOT 4 brake fluid used in the front lift system can have a negative reaction with the chemicals that are in the ABS plastic. It has been described to cause “catalytic embrittlement in the ABS, making it very brittle and weak”. While ABS plastic is normally very durable this chemical reaction with the brake fluid can cause the cover to break.
Please ensure that your reservoir cap is not leaking fluid prior to installation of the passenger side strut tower cover.
How to install (Installation Step) Please contact us if you need to install the video
1.Use the Pry tool or your hand to eject the side covers and the large center cover.Make them heid on and pull upward to remove them. NOTE:(When you replace the shock tower cover,please check whether there is water collect in strut mounts,if yes,use a hair dryer or cleaning cloths to soak up the water.)
2.Slide driver side under first: ①Pull the wire harness out of the way from the driver's side strut tower using a pry tool,make sure that the wire harness is behind the shock tower cover when install it. ②Remove the bolt from the side of the coolant reservoir with 10mm socket ③Take out strut tower cover and insert it into the tab between the strut tower and the reservoir.And tighten the bolt with 10mm socket.
3.Then install passenger side: ①Slide the passenger side strut cover into place by angling the cover towards the outer fender then rotating it into place.(Be careful not to bend or damage the hard line or coolant reservoir!) ②Used a zip-tie and funneled it through the screw hole on the cover and tied it along side a tube which was mounted on the car.(Ensure the zip tie is around the rubber isolator.)
4.Reinstall the center and side covers and the job is DONE.
NOTE:The installation steps for Mag Ride and NON-Mag Ride are the SAME
2. Buyers are responsible for additional COD charges, VAT, Custom fee and Duty for importation if there are any. Because, our prices are unable to include above fees, as the custom policies are different in every territories. But, we'd like to assist you to receive the goods smoothly if there are anything we can do here.
All orders will be shipped within handling time ( Business Days ) after the payment is cleared.
Ship from China：
We use Economy/ Standard / Expedited Shipping Service: all shipments will be with valid tracking number. It takes 8-20 business days to deliver.
Ships from U.S. warehouse：
Items will be sent via USPS, UPS ,Amazon shipping & FedEx from California Or New Jersey, United States. It takes 2-7 business days to deliver.
To Ensure Security, Please Make Sure That the Address Entered Matches the Shipping Address Which Provided at the Time of Payment.
If You Want to Shipped Your Items to Another Address Which Is Not Your Billing Address, Please Contact Us Through Ebay.
If you didn't received your shipment within estimated shipping time , please contact us. We will check and offer a good solution to you . Our goal is customer satisfaction!
Out 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition , it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.
Notice: 1.All returns must be pre-approved by Autopartm and have a return merchandise authorization (RMA) number.Unauthorized returns will not be accepted. 2.Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in “new” condition. Used items will not be accepted for return. 3.We will replace the returning item with an identical item, issue a full store credit or a full refund.
1.We have always been doing our best to provide the best service and reliable products for every customer.
2.Please do not hesitate to contact us to resolve the issues.We will reply your emails and questions within 24 hours.
We are a company specializing in motorcycle parts accessories ,Car accessories,Industry accessories, Home Garden accessories, we provide high-quality products at affordable prices and excellent service.
