Function--If your heater fan will turn on, but it won't light the burner, then it will shut off. Do some research online and if you confirm that you need to replace the sail switch, then purchase it to get the heater working again.Cures the problem of RV furnace not igniting in majority of cases.
Note--Please check the compatibility with your previous part and appliance's model before ordering this replacement part; the mention of brand names and any related model designation is only for purposes of demonstrating compatibility.
High-quality materials--Manufactured from high-quality sand steel to avoid shortening the service life due to rusting of the shell, and improve the pressure resistance and stability of the pump seat of the hydraulic wood splitter.
Satisfaction Guarantee-- Provide high-quality products and best service for customers. You can contact us if you are not satisfies with the product. We support 60 days full refund and 12 month warranty.
Product Description
Sail Switch
If your heater fan will turn on, but it won't light the burner, then it will shut off. Do some research online and if you confirm that you need to replace the sail switch, then purchase it to get the heater working again.Cures the problem of RV furnace not igniting in majority of cases.
STEP 1
Remove the four screws securing the vent assembly.
Slide the vent assembly out and away from the door.
Emove the four screws securing the door. Lift off the door.(Place the door in a safe location while servicing the furnace.)
STEP 1
There is no door on the outside of the RV, with a less door model. To access the furnace components:
Remove the four screws securing the vent assembly, then slide the vent assembly out and away from the RV.
Use the service access area located directly in front of the furnace on the inside of the RV.
STEP 3
Disconnect the two wires from the sail switch.
Initiate a furnace start.
Wait for the fan to start.
As soon as the fan starts, connect (jump) a wire across the two disconnected wires to simulate a closed switch.
NOTE: You must wait for the fan to start before jumping the sail switch.
STEP 4
Locate the sail switch:
-Older models: behind the blower.
-Atwood models: on the fresh-air side of the motor.
-Newer models: on the blower side of the motor.
Remove the two wires connecting the circuit board to the sail switch.
Remove the screws holding the sail switch bracket in place.
Remove the bracket and sail switch.
Replace with a current series switch. Do not use a larger switch or motor and ignition issues will occur.
Reverse the steps for re-installation.
Sail Switch
36680 Sail Switch Replacement,Low Air Flow Sail Switch Compatible with Atwood HydroFlame RV Furnace 36133, 31377
Package Include
2Pack * 36680 Sail Switch
1.Payment methods accepted: Paypal only. Our Paypal account allows you to pay by credit card, debit card and your Paypal balance. 2.All major credit cards are accepted through our secure payment processor Paypal. 3. We ship items to Your Paypal address.Please make sure your Paypal address is correct before you pay, cause it cannot be changed once the order shipped out.
1.Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. 2.All of the items are shipped from our Warehouse in USA.
1. Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 60 days after the date of package arrived. No Claim will be accept after 60 days. 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
About Feedback:
Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
● Due to the long transit time, the items may be damaged during transportation. If the items are damaged, please contact us before leaving the feedback.
● Negative or Neutral feedback does not resolve any underlying issues that you may be experiencing as a buyer.Any question or unsatisfaction please contact us with ebay message,we will sincerely solve for you.
If you are satisfied with our service, please leave us positive 5-Detailed Selling Rating (DSR). Thanks!