Product Name: EV Charger Station 5m Length Cable 16A 32A Type 2 22KW Wallbox Charger 
Nissan LEAF, Nissan eNV-2000, VW eGolf Chevy Volt, Chevy Bolt, Chevy Spark Toyota Prius Plug-In, Prius Prime,Toyota Rav4 EV Hyundai Ioniq,Kia Soul EV, Mercedes B Class Electric Drive,BMW i3 and i8 Ford Focus Electric, Ford C-Max Energy, Ford Fusion Energy, Fiat 500e ZERO motorcycle , Brammo motorcycle ,Smart Electric Drive, Karma Fisker, Mitsubishi iMiev, Cadillac ELR Porsche Cayenne S-E, Porsche Panamera S-E ,Honda Accord Plug-In Hybrid, Honda Fit EV ,Smart ,Honda
Tesla Model S, Tesla Model X (* need to use with Tesla charging adapter)
16Amp / 32Amp Type 2 to Type 2 EV Charging Cable for Electric Vehicle Car Charger Station 
 


Rated Current:
32Amp 22KW Three Phase
Operating Voltage
AC 400V
Product Size
310mm*200mm*80mm
Atmodpheric Pressure
80KPA~110KPA
Rated Frequency
50Hz
Working temperature
-20°C ~+50°C
Altitude
≤2000M
Relative humidity
5% ~ 95%
Waterproof
IP54
Certificate
CE,UL TUV Approved
Product Name
EV Charger Station 5m Length Cable 16A 32A Type 2 22KW Wallbox Charger 

EV Charger Station 5m Length Cable 16A 32A Type 2 22KW Wallbox Charger : 

Meet IEC 62196-2 (Type 2 Female EV Plug) EU European standard
Meet IEC 62196-2 (Type 2 Male EV Connector) EU European standard

EV Cable lenght: 3m, 5m, 10m or customized

Color of EV Charging Cord : Orange ,Green and Black.

 II. Normal operation of the environmental requirements
1. Working environment temperature: - 25 ℃ ~ + 60 ℃
2. Storage temperature: - 40 ℃ ~ + 70 ℃
3. Relative humidity: 5% ~ 95%
4. The installation of vertical orientation degree: 5% or less
5. Install operating altitude: 2000 meters or less
6. Use place no strong vibration and impact, no strong electromagnetic

7.Input power voltage range: three-phase 400V±20%
8.Insulation resistance:>10MΩ

9.Material anti-fire feature:UL94-V0
10.Working humidity:0~95%
11.Net weight:5.04kgs(with socket);7.74kgs(with cable and plug)

How to Charge
A. Start by swiping the card
1. Power on, and wait for the machine to beep "beep" and "beep" to indicate successful start up.
2. Connect the charging gun of car end and pile end.
3. Swipe the card. The sound of "di" indicates that the card has been successfully swiped.
4. Swipe the card again to stop charging.Note: the interval between card swiping is more than 5
seconds, otherwise there is no response. If the card is swiped again within 5 seconds and the
device has no response, the delay time will be delayed for another 5 seconds from this card
swipe.Do not swipe your card for another 5 seconds.
B. pair key chain