• Item Description:
  • Item Features
    • Condition:New
    • Placement on Vehicle：Driver Side or Passenger Side FRONT
    • Material:steel
    • Fitment type:Direct replacement
    • Warranty:1 Year
    • Fits 5 Lugs Wheels
    • No includes ABS
     
  • Vehicle Fitment
    • Fits 2000-2001? Dodge Ram 1500
     
  • Item Include
    • 1x wheel hub bearing
     
  • When do you need to replace

    • Front Wheel Bearing & Hub Assembly For 2000-01 Dodge Ram 1500 5.9L 5 Lug 515038

    Item Description:

    Item Features

    • Condition:New
    • Placement on Vehicle：Driver Side or Passenger Side FRONT
    • Material:steel
    • Fitment type:Direct replacement
    • Warranty:1 Year
    • Fits 5 Lugs Wheels

    • No includes ABS

     

    Vehicle Fitment

    • Fits 2000-2001? Dodge Ram 1500

     

    Item Include

    • 1x wheel hub bearing

     

    When do you need to replace

    • Poor Clicking, snapping or popping
    • Clunking or knocking
    • Rumbling, humming or growling
    • Wobble and/or wheel vibrations
    • Shimmy, shudder, or vibration at constant speeds
    • Abnormal side pulling when applying brakes
    • Uneven or abnormal tire wear
    • ABS failure

    How to Install

    • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
    • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
    • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
    • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
    • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
    • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. 
    • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
    • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. 
    • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. 
    • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts. 
    • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
    • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
    • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.

     

    Note

    • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.

    Item Specifics
    Brand autosuperstar
    Manufacturer Part Number 10338827
    Placement on Vehicle Front Right Or Left
    OE/OEM Part Number WE61253 715038 HA599863
    Type Wheel Hub & Bearing Assembly
    Vintage Car Part No
    Condition New
    Interchange Part Number 515038,BR930409,29515038
    Items Included 1pc wheel hub bearing
    Manufacturer Warranty 1 Year
    Material Steel
    Performance Part No
    Universal Fitment No
    Flange Diameter 7.2 in. / 183 mm
    Hub Pilot Diameter 3.91 in. / 99.3 mm
    Finish Polished, Rust Protected
    Wheel Stud Quantity 5
    Flange Offset 2 in. / 50.8 mm
    Brake Pilot Diameter 3.08 in. / 78.35 mm
    Wheel Pilot Diameter 3.06 in. / 77.64 mm
    Bolt Circle Diameter 5.5 in. / 139.7 mm
    Bolt Pattern 5 x 5.5 in (5 x 139.7 mm)
    Anti-lock Braking System Yes
    Wheel Studs Included Yes
    Wheel Stud Size 1/2"x20 UNF
    Flange Shape Triangle
    Drive Type 4WD Only
    Flange Bolt Hole Quantity 3
    Knuckle Bolt Circle Diameter 4.96 in. / 126 mm
    Knuckle Bolt Hole Size M14x1.5
    Flange Bolts Included No
    Inside Spline Quantity 33
    Bearing Generation G3
    Bearing Type Tapered Bearing
    Superseded Part Number WB15038 , WH515038
    ABS Sensor Not has ABS sensor

    Payment

    We only accept the payment methods which can be accepted by ebay.

    Shipping

    1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.

    2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.

    3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.

    Policy

    1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).

    2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.

    3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.

    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

    5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.

    6.Man-made damage by abuse or wrong operation is not covered by this warranty.

    Contact Us

    If there's any question or problem, do contact us please.

    Our Customer Servicers are always here to answer the question and solve the problem.

    Note

    Please DO check the compatible chart before placing orders to make sure it fits your vehicle.
    If there's any question about the conpatibilities, contact us please.

    Excellent Delivery

    content_src_url

    Shop Category
     Store Home
     Towing Mirrors
     2 pcs Wheel Spacers
     Wheel Hub Bearing
     Heater Core
     4 pcs Wheel Spacers
     Door Handle
     Windshield Wiper Motor
     Fuel Pump
     Air Parking Heater
     Window Regulator
     Throttle Body
     Window Switch
     AC Compressor
     ABS Wheel Speed Sensor
     Roof Rack
     AC Condenser
     4 pcs Wheel hub Bearing
     Sun Visor
     A/C Evaporator Core
     Spoiler Wing
     Headlights Assembly
     Fuel Injector
     Center Console
     Timing Belt Kit
     Timing Chain Kit
     Door Lock Actuator
     Detonation Knock Sensor
     Horn
     Radiator
     Fan & Shroud Assemblies
     Turbo Turbocharger
     Radiator Shutter
     Coolant Tank
     Water Pump
     Blower Motor
     Thermostat Housing
     Alternator
     Starter
     Radiator Support
     Tire Anti Slip Chains
     Other
    Hot Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    New List Item
    Front Wheel Bearing & Hub Assembly For 2000-01 Dodge Ram 1500 5.9L 5 Lug 515038

    Item Description:

    Item Features

    • Condition:New
    • Placement on Vehicle：Driver Side or Passenger Side FRONT
    • Material:steel
    • Fitment type:Direct replacement
    • Warranty:1 Year
    • Fits 5 Lugs Wheels

    • No includes ABS

     

    Vehicle Fitment

    • Fits 2000-2001? Dodge Ram 1500

     

    Item Include

    • 1x wheel hub bearing

     

    When do you need to replace

    • Poor Clicking, snapping or popping
    • Clunking or knocking
    • Rumbling, humming or growling
    • Wobble and/or wheel vibrations
    • Shimmy, shudder, or vibration at constant speeds
    • Abnormal side pulling when applying brakes
    • Uneven or abnormal tire wear
    • ABS failure

    How to Install

    • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
    • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
    • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
    • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
    • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
    • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. 
    • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
    • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. 
    • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. 
    • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts. 
    • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
    • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
    • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.

     

    Note

    • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.


    We only accept the payment methods which can be accepted by ebay.

    1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.

    2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.

    3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.

    1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).

    2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.

    3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.

    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

    5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.

    6.Man-made damage by abuse or wrong operation is not covered by this warranty.

    If there's any question or problem, do contact us please.

    Our Customer Servicers are always here to answer the question and solve the problem.

    Please DO check the compatible chart before placing orders to make sure it fits your vehicle.
    If there's any question about the conpatibilities, contact us please.


    All rights reserved.