Product Page
30A Brushless Motor Speed Controller with Temperature Protection PWM Signal G...
Description:


With single-chip control system, some functions could be altered: Startup: Flexible slow startup/direct startup Braking: Reverse load quick braking/free braking Adjustable Timing: Small/medium/large Low Voltage Protection: Low/medium/high Battery Types: Lithium /nickel chrome/NIMH/plumbic acid Back to Factory Settings: Wrong operation can be cleared Other Function(please ignore if only used for motor drive ) : The external PWM signal generator can send signal to control speed or to turn steering gear, therefore it can test steering gears less than 55 g. 30A ESC parameters: Output: continuous current 30A, short-time current 40A (not less than 10 seconds) Power input: 5.6V—16.8V (2-3 lithium batteries or 5-12 nickel-metal hydride / nickel-cadmium batteries) BEC output: linear regulation mode, 2A High speed: 2-pole motor (210,000 rpm), 6-pole motor (70,000 rpm), 12-pole motor (35,000 rpm) Size: 45mm * 24mm * 11mm Weight: 25g ESC tester parameters: Output: 15mA (5.0) Input voltage: DC 4.5-6.0v Output signal: 1.5ms ± 0.5ms Adjustment method: manual, neutral Dimensions: 42.5 x 24.0 x 23.5mm Weight: 9g We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package Includes: 1Pcs

 Features:
    • With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors.
    • Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is necessary for high-speed high-power motor to protect user's safety.
    • Temperature Protection: The speed control has aluminum heat sink, which allows it work at 30 A continuously. When temperature reaches 110 celsius degree, temperature detect system will send a protection signal and system will auto decrease 60% power output to protect speed control and motor. It will back to normal power after temperature is decreased. To protect the actuator module, please dissipate heat during long-time using.
    • The signal loss prevention: Auto shut down when there is no signal detected from PWM signal generator(potentiometer ).
    • Power Identification System: The speed control has power identification system, which is designed for high-speed high-power motors such as in model plane. It is not suitable for low-power brushless motors.