Item Description:

• 100% quality assurance tested, more responsive, less expensive, easier to install.
• Precisely trimmed solenoid windings enable optimum fuel delivery.
• High-temp O-rings enable prolonged sealing of injector under extreme heat conditions.
• Help you attain maximum fuel efficiency and power from your engine.
• Keep your vehicle performing reliably, efficiently, and safely for many miles to come.
• Promote smooth engine operation and balanced fuel delivery reducing overall fuel consumption and harmful emissions.
• Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life.

OE Number:

• Fuel Injector: 19210688, 12568332, 88894353.
• Fuel Injector Motor: 17113273.

Replace ManufacturerPart Numbers:

• FJ503, FJ10565, 217-3028, 2173028, 89060439, 833-22102-6, 25331863, 800-1512N, 17113295, 17114164, 17091628.

Installation Instructions:

• 1.Disabling the vehicle’s fuel pumpdisconnect the battery
• 2.Remove the air box system, throttle body, wiring harness connectors and the PCV valve and hose.
• 3.Remove Upper Intake Manifold cover and SCPI Fuel Meter Body
• 4.Remove the Fuel Meter Body bracket and replace it with the updated bracket.
• 5.Insert the MFI Fuel Meter Body into the Fuel Meter Body Bracket on the Lower Intake Manifold. Push down firmly on the fuel meter body locking it into the bracket.
• 6.Apply a coat of clean motor oil or non-silicone lubricant to the injector tip for easier installation.
• 7.Insert the number 3 injector into the correct hole in the Lower Intake Manifold first. Install the number 5 injector next and then number 1.
• 8.This sequence must be followed correctly to prevent interference of the Fuel Tubes. Injectors 2, 4, and 6 are then installed.
• 9.Temporarily reinstall the Fuel Inlet and Return Lines into the Fuel Meter Body.
• 10.Reconnect the battery and vehicle’s fuel pump.
• 11.Perform a Fuel Pressure System check to verify that the injectors are not leaking.
• 12.If everything is ok, reinstall the Upper Intake Manifold cover and Fuel lines.

Fitment:

• For 96-05Chevrolet Astro V6 4.3L.
• For 96-05 Chevrolet Blazer V6 4.3L.
• For 96-98Chevrolet C1500 V6 4.3L.
• For 96-04 Chevrolet Express V6 4.3L.
• For 96-98 Chevrolet K1500 V6 4.3L.
• For 96-99 Chevrolet P30 V6 4.3L.
• For 96-04 Chevrolet S10 V6 4.3L.
• For 99-04 Chevrolet Silverado V6 4.3L.
• For 96-98GMC C1500 V6 4.3L.
• For 02-96GMC Jimmy V6 4.3L.
• For 96-98 GMC K1500 V6 4.3L.
• For 96-05GMC Safari V6 4.3L.
• For 96-04 GMC Savana V6 4.3L.
• For 99-04 GMC Sierra V6 4.3L.
• For 96-04GMC Sonoma V6 4.3L.
• For 97-00Isuzu Hombre V6 4.3L.
• For 96-01Oldsmobile Bravada V6 4.3L.

Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs.

Material & Color:

• Material:made of high qualityABS Plastic and Metal.
• Color: As Picture.

Package Included:

• 1x Fuel Injector;
• 1x Retaining Bracket with Bolt.(100% Brand New Never Used Or Installed)

Note:

• Provide Tracking Number With Every Order, Please Buy With Confidence!
• No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.
• Will come with everything you see in the picture. Please allow difference due to manual measurement.
• Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
• For any inquiries or special requests such as larger amount ordering please write to us.