DESCRIBE

- Remote Control Duplicator 6.6x1.5CM Black--2
- Description:
- The Remote Control Duplicator is the easiest and least expensive way to copy any wireless remote, car key, garage door
- opener, and more!
- Specifications:
- Color: Black
- Type: Auto Remote Control Duplicator
- Material: Metal+Plastic
- Working voltage: DC12V
- Operating Current: ≤ 8mA
- Working frequency: 433MHz
- Modulation Mode: ASK (AM)
- The transmission power: ≤ 100mW
- Emission Distance: 50-100 m (proof)
- The encoding type: Self Copy
- The working temperature: -10 ° C to +50 ° C
- Works with the following remote control IC modules (please check your original remote control before ordering),and your remotes also should be Fixed code or Learning code. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D,etc
- Application: Garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products
- How to Program:
- Step 1 –Delete the existing code of our remote duplicator
1)Click and Hold A and B buttons together - Led will flash 3 times
2)Keep holding A button and release B button
3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop
- Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted!
- Step 2 - Clone your original remote
1)Put both remotes Into back to Back position. Make sure they have direct-contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)
- If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.

- Sydney local Stock, Fast deliver!

 

  • *NOTE:
    - Due to Australian government regulations, lithium batteries can not be shipped in Australia via AIR Cargo
    - All orders are shipped via ROAD.
    - KEEP OUT OF REACH warning label
    - All batteries include New Safety Alert Symbol
    - Swallowing may lead to serious or fatal injury in as little as 2 hours, due to chemical burns and potential perforation of the esophagus.
    - Never allow children to replace button batteries of any device.
    - Regularly examine devices and make sure the battery compartment is correctly secured. e.g., that the screws or other mechanical fastener is tightened.Do not use if compartment is not secure.
    - Dispose of used button batteries immediately and safely out of reach of children. A battery can still be dangerous even when it can no longer operate the device.
    - Tell others about the risk associated with button batteries and how to keep their children safe.
    *WARNING:
    Button/coin batteries can cause severe injuries or even death when swallowed. Keep batteries out of reach of children. If you suspect a child has swallowed or inserted a button/coin battery, seek medical attention immediately or call the 24-hour Poisons Information Centre on 13 11 26 (Australia) for fast, expert advice.

PACKAGE

- 2 x Remote Control Duplicator(Black)

 


On 18/07/2024 at 16:20:18 AEST, seller added the following information:

 

DataCaciques


On 27/09/2024 at 00:19:51 AEST, seller added the following information:

DataCaciques