This voltage converter detects whether 230 V mains voltage is present as input voltage and switches between battery and mains voltage. If the input voltage is 230 V, your battery will be charged by the integrated charger with 5A (at 24V) or 10A (at 12V) recharged.

Compatible with Allen batteries (lead acid, gel and AGM batteries (not LiFePO4 batteries)) from:

- 100 Ah at 1000 watt voltage converter

- 150 Ah at 1500 watt voltage converter

- 200 Ah at 2000 watt voltage converter

- 300 Ah at 3000 watt voltage converter

Not suitable for LiFePO4 (lithium) batteries and no conversion possible!

Scope of delivery: converter, DC connection cable, operating instructions included. Wiring diagram

• UPS - uninterruptible power supply
• pure SINE voltage
• Soft start function
• 2x protective contact socket
• Average self-consumption when switched off 0 watts
• Reverse polarity protection for battery (fuse trips)
• Automatic shutdown in case of overload or short circuit
• Approved for use in vehicles
• Stable housing made of aluminum and molded sheet metal
• Certificates: Transducer, CE, RoHS; E8 Manufacturing according to din ISO 9001:2000

Please note that the inverter has power-dependent control of the fans. This means that from approx. The internal fans run at 10% of the continuous power.

If you connect a consumer to the inverter that remains below 10%, the fans will not start either.

From an internally measured temperature of approx. At 60°C the inverter switches off completely.