This set consists of 1x 12V Power Clip 1x 12V Power Socket and 1x Power Port Cover and 12V power lead


MagCode Power System is a revolutionary magnetic connector system for 12 V and 24 V DC applications


The Power Port (socket) and Power Clip (plug) both contain magnets and within the port is a movable plate that when “attracted” by the clip allows current to pass.

This system is uniquely keyed so there cannot be a miss mating between 12 and 24V which also makes the system short circuit proof. Once the clip is removed the port is de-energised so even if the contacts are shorted out by a metal object nothing will happen.


Thus the MagCode PowerSystem is 100% short-circuit-proof.


Applications

The MagCode Power Systems already used in several OEM's are ideal for passenger cars, trucks, motorcycles, campers and boats where cigarette lighter receptacles are presently in use for exterior connectors on vehicles, under conditions of sustained charging and high current load.

Power Port - 6.3mm flat connectors 

Power Clip - Screw terminals 

Mounting Opening - 28mm diameter (M28)

Max. current load 15 A

The power lead is 1.5M total length, and is made with 1.5mm² cable (rated at 21A). One end of the cable is fitted with 6.3mm fully insulated Female Spade Terminals for connection to the Magcode Powerport Socket. The other end is terminated with M6 (1/4") brass rings for connection to your battery. 

The supplied 20mm fuse is 5A, however this could be exchanged for a fuse of up to 10A (other fuses not supplied)

For further electrical solutions please visit our Ebay store by clicking here