Display 3: ”ON” Led ON,”LOW” Led twinkling; Testing results:11.2-11.6V Charging Voltage, Low charged Battery, being charged immediately. 

  Display 4:”Low” led on, ”Middle” led twinkling; Testing results: 11.6-12.2V Charging Voltage, Middle charged Battery, better being charged sooner.

 

Display 5: “Middle” Led on; Testing results: 12.2V Charging Voltage, Middle charged Battery, better being charged.

Display 6: “Middle” Led on, ”Full” Led twinkling; Testing results: 12.2-13.1V Charging Voltage, Middle charged Battery, better being charged.

 

Display 7: “Full” Led on, ”Good” Led twinkling; Testing results: 13.1-14V Charging Voltage, Good battery, Full Charged

Display 8:”Good” Led on; Testing results: 14V Charging Voltage, Good battery, Full Charged.

 

Display 9:”Good” Led on, “Fault” Led twinkling; Testing results: 14-16V Charging Voltage, Battery may be damaged, Check the engine and tester.

Display 10:“Fault” Led on; Testing results: Above 16V Charging Voltage, fault Battery.

  

Feature:

• 6-LED display, clearly present the alternator and battery state.
• Two testing clips for safe and easy operation.
• Small size and light weight, convenient to carry.
• Fit for all 12 V car, motorcycle battery etc.
• With a good chip inside, not easy to get hot on the surface.

Specifications:

• LED quantity: 6 (2 red, 3 green, 1 yellow)
• Material of wire: 0.06 square millimeter copper
• Max. voltage / current: 12V / 15A
• Length of wire: 14.2inchs/36.2cm
• Using: Improve driving safety
• Material : Plastic, Copper
• Color : Gray
• Product size (L x W x H) : 4.7 x 1.9 x 0.75inches/ 12 x 4.8 x 1.9 cm
• Package size (L x W x H) : 5.6 x 2.2x 1.4 inches / 13.5 x 5.6 x 3.6 cm

6 LED Lights:

• Alternator state
• First light (Red): Fault
• Second light (Gree): Good
• Battery State
• First light (Green): Full
• Second light (Yellow): Middle
• Third light (Red): Low
• Check Before charge
• First light (green): OK

• 1.Checking charge level
• 2.Functional test of dymano
• 3.Checking battery starting capability
• 4.Battery overload display

Connections:

• Attach the cable clip of the red cable to the plus point(+）of the battery and the cable clip of the black cable to the minus point(-)of the battery.

Different LED display to show Battery Sate:

• Display 1: All Led lights off; Testing results: none Charging Voltage, Dead Battery
• Display 2:”ON” led twinkling, other Led off; Testing results:4.6-11.2V Charging Voltage, Engine being hardly turned on, turn off all electrical equipment and charge battery immediately.

Packing list:

• 1 x 12V battery tester
• 1 x User manual