Product Description:

1. Preparation: one SIM card and mini memory card.

2. Power-on: open the card cover and insert the SIM card according to the direction indicated. After inserting the mini memory card, the product will turn on the red light and turn off for 4 times.[note: reinsert the memory card without reading it]

3. Indicator light: the power on indicator light is always on and off for 4 times, and the low battery indicator light flashes quickly

4. Bind the master control number;Edit SMS 000 with mobile phone and send it to the alarm locator number. Later, the phone will reply a SMS message.The Set;Bind + master control number

5. Recording separately;Use mobile phone to edit SMS 555 and send it to the alarm locator number. Later, the phone will reply a SMS message.【Snd; recording has started 】

6. Voice control call back;Edit SMS 666 with mobile phone and send it to the alarm locator number. Later, the phone will reply a SMS message.[DT; sound monitoring has been successfully set, alarm calls are returned],

When the sound around the alarm locator is more than 40 decibels, the alarm locator will automatically call the pre-set phone number.

7 GPRS positioning query: text message 777 sent to the alarm locator number, later the phone reply to a Chinese geographical location and Google map link, mobile phone open this link will appear location map and text address description, make the location more accurate.

8. Sound query around the product: directly call the card number in the alarm locator, and after a few seconds, you can hear the sound around the alarm locator (the alarm locator itself will not emit any sound or light in the query).

9. Query positioning track;Edit SMS 102 with mobile phone and send it to the alarm locator number. Later, the phone will reply with an [account number, password] and log in the website HTTP./ / gpsui.net

10. Location tracking;Operate in computer platform can.

11. Delete the contents of the memory card;Edit SMS message 445 with mobile phone and send it to the alarm locator number. Later, the machine will reply a message to the mobile phone [TF, cleaned successfully, current capacity available].

12. Host status;Edit SMS 888 with mobile phone and send it to the alarm locator number. Later, the phone will reply a SMS message.[turn on or off battery capacity binding number, signal strength, power on frequency, GPRS TF card capacity, etc.]

13. Restart the host;Edit SMS 999 to send to the alarm locator number, wait 1 minute to restore success.

14. Turn off, the information has the display stop function of remaining power;Use mobile phone to edit SMS 444 and send it to the alarm locator number. Later, the phone will reply to Reset; all tasks have been cancelled.

15. Power inquiry: there is power in the information you reply to each location.

 

Specifications:

1. Appearance size :3.5cm*2.0cm*1.4cm(L*W*H)

2. Charging input inputac110-220v50/60hz

3. Charging output: outputdc5.0v 300-500ma

4. Machine battery: 3.7v 400mAh li-ion battery

Standby time: 12 days.Working hours: 4-6 days

6.Expansion CARDS;Mini TF card

9. Continuous call: 150-180 minutes

10. Network system: GSM/GPRS

11..Storage temperature: -40°C to +85°C

12. Operating temperature: -20°Cto +55°C

13. Humidity range: 5%--95% non-condensing

14, GPRS: Upload60, TCP/IP

15. Working voltage: 3.4-4.2v DC

Standby current: ≈ 2.5ma

17. Turn on the voice control current: ≈30mA

18. Communication current: ≈150mA

19. GSM positioning time: 25 seconds

Basic parameters: band gsm850/900/1800/1900mhz

Countries of support: China, Britain, France, Germany, Netherlands, Italy, Spain, Portugal, Brazil, Denmark, Russia, Turkey, Turkey, Thailand, Greece, Indonesia, Malaysia, Vietnam, myanmar, Pakistan, Iraq, Saudi Arabia, USA, kazakhstan, outer Mongolia, dubai, etc.

 

Frequently encountered problem

1. The main machine can't be connected

A: you have to insert the SIM card to start up the phone signal, so you just need to turn off the machine and start up again.Also is your mobile phone card is not in the server, no signal.

2. TF memory card cannot be stored?

A: first check if there is any problem with the TF memory card. If there is no problem with the TF memory card, you can format the TF memory card and try again.

3 unable to charge?

Answer: to charge must insert GSM card, if not in the realization of charging.

What is the master control mobile phone?

A: the phone you need to monitor the burglar alarm.

Special warning: when the deficiency of alarm locator (power under 5%) please charge in time, such as the battery is in a state of loss of electricity for a long time, will inevitably cause the battery to discharge depth affect battery performance and life, serious battery charge it into electricity or scrap, such as alarm locator when not in use, please put the battery charged to 60% - 80%, disconnect the power of the locator, in storage, not for a long time (three months) please the locator to supplement the electric regularly, in order to protect the battery, in order to you better use this machine, please read and follow the above, thanks

 

Notes:

In order to achieve a more accurate position, it is recommended to use the mobile SIM card and confirm the opening of GPRS (such as DW SMS reply position will not generate traffic, such as DT or DT3 query on the map need to open GPRS monthly rent, need traffic.If just bought some card to use the second day to search the signal.

Use SIM card, try not to save too many messages, especially full, so as not to affect the function.

The new machine should be fully charged before use to achieve better effect.

The light is not on. The battery is dead

Can not get through the phone, re-insert the card boot or charge after use

Do not automatically answer, re-insert card

Confirm that there is a call display function, do not open the call transfer function

Verify that the PIN code of the card is closed (that is, do not need to enter the password to use when put in the mobile phone).

Charge the battery before use. It is forbidden to burn out the machine during charging. It is better to take out the mobile phone card after charging.