To fit:

056925 Extenda Fenda EXTRA for Triumph Tiger 850 Sport 2021-2026

056925 Extenda Fenda EXTRA for Triumph Tiger 900 2020-2026

056925 Extenda Fenda EXTRA for Triumph Tiger 900 GT 2020-2026

056925 Extenda Fenda EXTRA for Triumph Tiger 900 GT Pro 2020-2026

056925 Extenda Fenda EXTRA for Triumph Tiger 900 GT Low 2020-2026

(does NOT fit Rally Pro models)

• Manufactured from ABS
• Adding an extension of 260mm to your OEM Front Guard (120mm longer than the standard Fenda Extenda)

The Pyramid Extenda Fenda EXTRA caters for those riders who seek a practical and substantial solution for protecting their motorcycle from the elements. Customer comments and suggestions always prove invaluable to the Pyramid design team and longer front mudguards have always been a frequent topic of conversation. The Extenda Fenda EXTRA aims to be the most functional mudguard extension available for your motorcycle. This product will help keep your exhaust headers and lower engine free from dirt whilst also protecting your expensive radiator from stone damage. Specifically designed to follow the contour of your motorcycle's front guard, the Extenda Fenda EXTRA is supplied with laser-cut brackets and all necessary fixings. Be sure to read the fitting instructions for more information on this product.

Kit Includes:

1 x C056925 Moulding

2 x CFK056925 Brackets (pair)

2 x CBOL0106 M5 x 12mm Black Stainless Steel Bolt

4 x CWAS0105 M5 Stainless Steel Washer

2 x CNUT0151 M5 Stainless Steel Serrated Nut

1 x CFOA0002 Foam Strip 20mm x 1.5mm (cut to 190mm length)

4 x CFIT0013 Push-rivet

Fitting Instructions:

We advise the use of thread locking fluid on all the fixings for this product.

Loosely attach the mudguard to the brackets using the M5 fixings supplied. Place the M5 stainless steel washers under the bolt head and under the serrated nut.

Cut and attach the foam provided in the area marked ‘A’ in the picture.

Remove the bottom OEM bolts from the brake calipers marked ‘B’ in the picture. 

Attach the mudguard assembly to the brake calipers using the OEM bolts. Once the mudguard is in place, check alignment. The exact position of the mudguard can be adjusted by pulling/pushing the assembly up/down if required. Avoid excessive pressure if doing so.

Now tighten all the mounting points. Check fixings periodically.

Note: The 4 push-rivets supplied are not integral to the fitment of this product, but have been supplied for those customers who would prefer to have mechanical fixing at the point where the two guards meet.

Professional installation by a qualified motorcycle mechanic is highly recommended to ensure correct fitment and safety.