• Item Features
  •  
  • Easy to install and direct replacement.
  • Stable characteristics, high reliability
  • A Perfect Aftermarket Replacement
  • Manufactured with premium materials to withstand the elements and ensure proper function
  • Sealed connections to prevent environmental corrosion and performance issues
  • High quality construction for durability
  •  
  • Installation Steps
  •  

    • For Nissan Sentra 2.0L 2007-2012 Engine Crankshaft Position Sensor 23731-1VA0A

    Item Features

     

    Easy to install and direct replacement.

    Stable characteristics, high reliability

    A Perfect Aftermarket Replacement

    Manufactured with premium materials to withstand the elements and ensure proper function

    Sealed connections to prevent environmental corrosion and performance issues

    High quality construction for durability

     

    Installation Steps

     

    1. Disconnect the Battery.Remove the disarm plug for the main battery pack on hybrid vehicles as well.
    2. Clear Access to the Sensor.This crank sensor is located behind the starter motor, which must be removed to access the sensor.
    3. Inspect the Sensor Location.Because of the transmission cooling lines, this sensor is difficult to notice, although it is located on the side of the block with the electrical connector attached.
    4. Release the Electrical Connector.A plastic clip will hold an electrical hookup to the sensor, which you must push down or pull outward to disengage.
    5. Remove the Sensor Mount Bolt.The majority of crankshaft sensors only have one mounting bolt, which is usually a 10mm bolt.
    6. Remove the Sensor.To push the sensor mounting tab away, insert a small pick or a regular screwdriver beneath it.
    7. Match the New Crankshaft Sensor.Wipe away any grease from the old sensor so you can notice any design differences in the new sensor.
    8. Installing the New Crank Position Sensor.Clean the position sensor porthole with a shop towel before inserting the new sensor to ensure a proper seal to the new sensor O ring.
    9. Reconnect the Battery.When you're done, take the car off the jack stands and rejoin the negative battery cable, and you're ready to go.

     

    Symptoms of a Failing Crankshaft Position Sensor

     

    • Issues Starting the Vehicle.
    • Intermittent Stalling.
    • Check Engine Light Comes On.
    • Uneven Acceleration.
    • Engine Misfires or Vibrates.
    • Rough Idle and/or Vibrating Engine.
    • Reduced Gas Mileage.

     

    Fit for

     

    Nissan  Sentra  2007-2012  2.0L 1997CC 122Cu. In. l4 GAS DOHC Naturally Aspirated   
    Nissan  Cube  2009-2014  1.8L 1798CC l4 GAS DOHC Naturally Aspirated   
    Nissan  Tiida  2007-2013  1.8L 1797CC 110Cu. In. l4 GAS DOHC Naturally Aspirated   
    Nissan  Versa  2007-2012  1.8L 1798CC l4 GAS DOHC Naturally Aspirated   
    Nissan  NV200  2013-2015  2.0L 1997CC l4 GAS DOHC Naturally Aspirated   
    Nissan  Tiida  2013  1.8L 1800CC 110Cu. In. l4 GAS DOHC Naturally Aspirated

     

    Note

     

    Check and replace sensors regularly to prevent accidents

    If you have any questions about the product, please do not hesitate to contact us.

    Our products are high quality aftermarket parts that can replace the original parts of your car.

    Please understand that the color of the product in the photo may be a little different from the real product due to the lighting problem.

    Please refer to the listing pictures for an accurate description of the parts included in the kit

     



    Payment
    • Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
    Shipping
    • Please note that shipping times on Ebay are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
    Returns
    • When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement. 
    Contact Us
    • Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails.
    • Positive feedback will be left automatically to customers when your payment is cleared.
    Warranty
    • We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
    • Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
    • Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
    • For malfunction products under warranty period, please contact our customer service via EBay Message.
    Shop Category
     Store Home
     alternator
     catalytic converter
     Drive Shaft
     Engine Mount
     Other
     parking sensor
     rectifier
     sensor
     starter
     stator
     steering Rack
     transmission filter
     transmission kit
    Hot Item
    Excellent Delivery

    content_src_url

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    New List Item
    For Nissan Sentra 2.0L 2007-2012 Engine Crankshaft Position Sensor 23731-1VA0A

    Item Features

     

    Easy to install and direct replacement.

    Stable characteristics, high reliability

    A Perfect Aftermarket Replacement

    Manufactured with premium materials to withstand the elements and ensure proper function

    Sealed connections to prevent environmental corrosion and performance issues

    High quality construction for durability

     

    Installation Steps

     

    1. Disconnect the Battery.Remove the disarm plug for the main battery pack on hybrid vehicles as well.
    2. Clear Access to the Sensor.This crank sensor is located behind the starter motor, which must be removed to access the sensor.
    3. Inspect the Sensor Location.Because of the transmission cooling lines, this sensor is difficult to notice, although it is located on the side of the block with the electrical connector attached.
    4. Release the Electrical Connector.A plastic clip will hold an electrical hookup to the sensor, which you must push down or pull outward to disengage.
    5. Remove the Sensor Mount Bolt.The majority of crankshaft sensors only have one mounting bolt, which is usually a 10mm bolt.
    6. Remove the Sensor.To push the sensor mounting tab away, insert a small pick or a regular screwdriver beneath it.
    7. Match the New Crankshaft Sensor.Wipe away any grease from the old sensor so you can notice any design differences in the new sensor.
    8. Installing the New Crank Position Sensor.Clean the position sensor porthole with a shop towel before inserting the new sensor to ensure a proper seal to the new sensor O ring.
    9. Reconnect the Battery.When you're done, take the car off the jack stands and rejoin the negative battery cable, and you're ready to go.

     

    Symptoms of a Failing Crankshaft Position Sensor

     

    • Issues Starting the Vehicle.
    • Intermittent Stalling.
    • Check Engine Light Comes On.
    • Uneven Acceleration.
    • Engine Misfires or Vibrates.
    • Rough Idle and/or Vibrating Engine.
    • Reduced Gas Mileage.

     

    Fit for

     

    Nissan  Sentra  2007-2012  2.0L 1997CC 122Cu. In. l4 GAS DOHC Naturally Aspirated   
    Nissan  Cube  2009-2014  1.8L 1798CC l4 GAS DOHC Naturally Aspirated   
    Nissan  Tiida  2007-2013  1.8L 1797CC 110Cu. In. l4 GAS DOHC Naturally Aspirated   
    Nissan  Versa  2007-2012  1.8L 1798CC l4 GAS DOHC Naturally Aspirated   
    Nissan  NV200  2013-2015  2.0L 1997CC l4 GAS DOHC Naturally Aspirated   
    Nissan  Tiida  2013  1.8L 1800CC 110Cu. In. l4 GAS DOHC Naturally Aspirated

     

    Note

     

    Check and replace sensors regularly to prevent accidents

    If you have any questions about the product, please do not hesitate to contact us.

    Our products are high quality aftermarket parts that can replace the original parts of your car.

    Please understand that the color of the product in the photo may be a little different from the real product due to the lighting problem.

    Please refer to the listing pictures for an accurate description of the parts included in the kit

     



    • Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
    • Please note that shipping times on Ebay are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
    • When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement. 
    • Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails.
    • Positive feedback will be left automatically to customers when your payment is cleared.
    • We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
    • Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
    • Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
    • For malfunction products under warranty period, please contact our customer service via EBay Message.

    All rights reserved.