• Item Description:
  • Item Features
    • Condition:New
    • Placement on Vehicle：LH (Driver Side) & RH (Passenger Side) Front
    • Material:steel
    • Fitment type:Direct replacement
    • Warranty:1 Year
    • Fits 6 Lugs Wheels
    • ABS Type: Sensor Wire
    • Drive Type: RWD
    • Fitment Note: Z85 Suspension Models Only
    • Replaces dealer part numbers: 515104, WA515104, TMHA590058, HA590058, BR930702, H515104, 8151788820, 15178882, 15176995, 515105, 29515105, WB515105, 15176996, 15178881, 8151788810
     
  • Vehicle Fitment

    • 2x Front Wheel Hub Bearings For 2004-2008 Chevy Colorado Canyon Z85 Chassis RWD

    Item Description:

    Item Features

    • Condition:New
    • Placement on Vehicle：LH (Driver Side) & RH (Passenger Side) Front
    • Material:steel
    • Fitment type:Direct replacement
    • Warranty:1 Year
    • Fits 6 Lugs Wheels
    • ABS Type: Sensor Wire
    • Drive Type: RWD
    • Fitment Note: Z85 Suspension Models Only
    • Replaces dealer part numbers: 515104, WA515104, TMHA590058, HA590058, BR930702, H515104, 8151788820, 15178882, 15176995, 515105, 29515105, WB515105, 15176996, 15178881, 8151788810

     

    Vehicle Fitment

    • Fits Isuzu I-290 2007-2008 2WD Z85 Chassis
    • Fits Isuzu I-370 2007-2008 2WD Z85 Chassis
    • Fits Isuzu I-280 2006 2WD Z85 Chassis
    • Fits Chevrolet Colorado 2004-2008 2WD, Z85 Chassis
    • Fits GMC Canyon 2004-2005 2WD, Z85 SL, Z85 SLE
    • Fits GMC Canyon 2006-2008 2WD, Z85 Chassis

     

    Item Include

    • 1x Front Left Wheel Hub Bearing - 515104
    • 1x Front Right Wheel Hub Bearing - 515105

     

    When do you need to replace？

    • Poor Clicking, snapping or popping
    • Clunking or knocking
    • Rumbling, humming or growling
    • Wobble and/or wheel vibrations
    • Shimmy, shudder, or vibration at constant speeds
    • Abnormal side pulling when applying brakes
    • Uneven or abnormal tire wear
    • ABS failure

    How to Install？

    • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
    • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
    • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
    • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
    • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
    • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. 
    • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
    • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. 
    • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. 
    • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts. 
    • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
    • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
    • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.

     

    Note

    • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.

    Item Specifics
    Brand autosuperstar
    Manufacturer Part Number 10139203
    Placement on Vehicle Front
    OE/OEM Part Number 8151788820, 15178882, 15176995
    Type Wheel Hub & Bearing Assembly
    Vintage Car Part No
    Condition New
    Interchange Part Number 515104, 515105
    Bolt Circle Diameter 5.5 in. or 139.7mm
    Brake Pilot Diameter 3.94 in. or 100mm
    Flange Offset 2.65 in. or 67.4 mm
    Items Included 2pcs wheel hub bearing
    Manufacturer Warranty 1 Year
    Material Steel
    Performance Part No
    Superseded Part Number 15176996, 15178881, 8151788810
    Universal Fitment No
    Wheel Pilot Diameter 3.92 in. or 99.5 mm
    Flange Diameter 7.25 in. or 184.25mm
    Hub Pilot Diameter 3.35 in. or 85mm
    Suface Polished, Rust Protected
    Wheel Stud Quantity 6
    Bolt Pattern 6 x 5.5 in (6 x 139.7 mm)
    Anti-lock Braking System Yes
    Surface Finish Polished, Rust Protected
    Flange Bolt Hole Quantity 4
    Flange Shape Rectangular
    Flange Bolt Size M12x1.75
    Wheel Studs Included Yes
    Bearing Generation Type G3
    Wheel Stud Size M12x1.5
    Bearing Type Tapered Roller Bearing
    ABS Sensor Has ABS with tegral Sensor
    Quantity 2

    Payment

    We only accept the payment methods which can be accepted by ebay.

    Shipping

    1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.

    2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.

    3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.

    Policy

    1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).

    2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.

    3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.

    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

    5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.

    6.Man-made damage by abuse or wrong operation is not covered by this warranty.

    Contact Us

    If there's any question or problem, do contact us please.

    Our Customer Servicers are always here to answer the question and solve the problem.

    Note

    Please DO check the compatible chart before placing orders to make sure it fits your vehicle.
    If there's any question about the conpatibilities, contact us please.

    Excellent Delivery

    content_src_url

    Shop Category
     Store Home
     Towing Mirrors
     2 pcs Wheel Spacers
     Wheel Hub Bearing
     Heater Core
     4 pcs Wheel Spacers
     Door Handle
     Windshield Wiper Motor
     Fuel Pump
     Air Parking Heater
     Window Regulator
     Throttle Body
     Window Switch
     AC Compressor
     ABS Wheel Speed Sensor
     Roof Rack
     AC Condenser
     4 pcs Wheel hub Bearing
     Sun Visor
     A/C Evaporator Core
     Spoiler Wing
     Headlights Assembly
     Fuel Injector
     Center Console
     Timing Belt Kit
     Timing Chain Kit
     Door Lock Actuator
     Detonation Knock Sensor
     Horn
     Radiator
     Fan & Shroud Assemblies
     Turbo Turbocharger
     Radiator Shutter
     Coolant Tank
     Water Pump
     Blower Motor
     Thermostat Housing
     Alternator
     Starter
     Radiator Support
     Tire Anti Slip Chains
     Other
    Hot Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    New List Item
    2x Front Wheel Hub Bearings For 2004-2008 Chevy Colorado Canyon Z85 Chassis RWD

    Item Description:

    Item Features

    • Condition:New
    • Placement on Vehicle：LH (Driver Side) & RH (Passenger Side) Front
    • Material:steel
    • Fitment type:Direct replacement
    • Warranty:1 Year
    • Fits 6 Lugs Wheels
    • ABS Type: Sensor Wire
    • Drive Type: RWD
    • Fitment Note: Z85 Suspension Models Only
    • Replaces dealer part numbers: 515104, WA515104, TMHA590058, HA590058, BR930702, H515104, 8151788820, 15178882, 15176995, 515105, 29515105, WB515105, 15176996, 15178881, 8151788810

     

    Vehicle Fitment

    • Fits Isuzu I-290 2007-2008 2WD Z85 Chassis
    • Fits Isuzu I-370 2007-2008 2WD Z85 Chassis
    • Fits Isuzu I-280 2006 2WD Z85 Chassis
    • Fits Chevrolet Colorado 2004-2008 2WD, Z85 Chassis
    • Fits GMC Canyon 2004-2005 2WD, Z85 SL, Z85 SLE
    • Fits GMC Canyon 2006-2008 2WD, Z85 Chassis

     

    Item Include

    • 1x Front Left Wheel Hub Bearing - 515104
    • 1x Front Right Wheel Hub Bearing - 515105

     

    When do you need to replace？

    • Poor Clicking, snapping or popping
    • Clunking or knocking
    • Rumbling, humming or growling
    • Wobble and/or wheel vibrations
    • Shimmy, shudder, or vibration at constant speeds
    • Abnormal side pulling when applying brakes
    • Uneven or abnormal tire wear
    • ABS failure

    How to Install？

    • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
    • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
    • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
    • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
    • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
    • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. 
    • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
    • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. 
    • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. 
    • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts. 
    • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
    • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
    • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.

     

    Note

    • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.


    We only accept the payment methods which can be accepted by ebay.

    1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.

    2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.

    3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.

    1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).

    2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.

    3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.

    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

    5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.

    6.Man-made damage by abuse or wrong operation is not covered by this warranty.

    If there's any question or problem, do contact us please.

    Our Customer Servicers are always here to answer the question and solve the problem.

    Please DO check the compatible chart before placing orders to make sure it fits your vehicle.
    If there's any question about the conpatibilities, contact us please.


    All rights reserved.