WARNING : WILL ONLY WORK ON 12V SYSTEMS! Leaving indicators on is a dangerous thing to do, we all know that !
So this little device should solve the problem !
This
is
an audible device that buzz's at the same time that the indicators
flash, very low voltage drain so it wont make your indicators flash at
a slower speed, you should never forget to cancel your turn signal
again when this is fitted to your machine.
This buzzer can be mounted anywhere by either using 3M tape on the back or screw it to any surface using two mounting holes on the side.
Important : If you have newer harness with one rectangular relay that handles all functions or want to install the buzzer to blinkers directly, you would have to do three-way installation. To prevent power back flow, you would need to install two diodes in each power wire (diagram attached)
Buzzer specs
- Diameter: 22.5mm
- Height: 11mm
- 2 Mounting Holes distance: 30mm
- 2 Wires length: 100mm
- Sound Pressure Level 95 dB
- Rate Voltage: 12V DC
- Operating Voltage: 3 - 24V
- Max Current Rating 10mA
- Frequency 3900±500Hz
Included in the sale:
1 - buzzer assembly
2 - quick splice connectors
2 - diodes (if 3-way installation is required)
1 - set of instructions
We have three different types of these reminders.
SOLD EACH !
I reserve the right to close auction early for any reason.
If you have questions, ask before bidding.
Item is sold AS IS. No warranties are written or implied.
All sales are final.
Thanks for looking and RIDE SAFE !!!