Features:
DC 280W 9A 7-40V To 1.2-35V
100% brand new and high quality
Use a dedicated benchmark IC, and high-precision current sensing resistor,
High output current, the max output current can reach 9A.
Low output ripple , high frequency capacitor reduces output ripple.
Suitable for LED driver.
Specification:
Material: PCB board and electronic component
Color: as the pic shows
Input voltage 7-40V (without constant 5-40V)
The output voltage (1.2-35V)
Maximum output current 9A
Maximum power 280W
Frequency 180KHZ
Output Power: Maximum power is about 280W
(power tube temperature exceeds 65°C please add cooling fan)
Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
Package Included:
1 x 280W DC 9A Step Down Buck Converter 7-40V To 1.2-35V Power module LED Driver
DC CC 9A 280W Step Down 7-40V To 1.2-35V
100% brand new and high quality
Use a dedicated benchmark IC, and high-precision current sensing resistor, can make more stable constant current
High output current, the max output current can reach 9 A.
Low output ripple , high frequency capacitor reduces output ripple.
Suitable for LED driver.
Specification:
Material: PCB board and electronic component
Color: as the pic shows
Input voltage 7-40V (with constant 5-40V)
The output voltage (1.2-35V)
Maximum output current 9A
Maximum power 280W
Frequency 180KHZ
Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
Package Include:
1 x DC CC 9A 280W Step Down Buck Converter 7-40V To 1.2-35V Power Supply module
DC-DC 12A 200W 4.5-30V to 0.8-32V
Type: non-isolated step-down module (Buck)
Dimensions: 70mm x 39mm x 31mm
Input voltage :4.5-32V ( please don't exceed 32V)
Output voltage :0.8-30V (continuously adjustable)
Output current :0-12A (Max.)
Output power: 100W, 200W (enhance heat dissipation)
Operating frequency: 180KHz
Conversion efficiency: up to 95%
Operating temperature: -40 to +85 °c
Short circuit protection: Yes (please try not to short-circuit)
Overtemperature protection: Yes (automatically shutdown the output)
Input reverse polarity protection: Yes (can not be prolonged reverse)
Installation: terminals, needn't solder
IN+: input positive
IN- : input negative
OUT+: output positive
OUT-: output negative
Voltage convert: 12 to 3.3V; 12V to 5V; 24 to 5V; 24V to 12V
DIY an adjustable voltage regulated power supply
24V Car Laptop power supply
Car LED power supply
Small power motor speed control
Power supply transformers
Industrial equipment buck
Batteries buck, and etc.
Package included:
1PC*12A 200W Adjustable DC-DC Step Down Converter Buck module 4.5-30V to 0.8-32V
DC-DC 10A 5-30V to 1-30V
INSTRUCTIONS: 1. First determine the operating current and maximum operating voltage of the LED you need to drive. 2. With the CV trimmer, adjust the output voltage to about 5V.
3. Switch your multimeter into its 10A current scale and measure the module’s short-circuit output current. Turn the CC trimmer to adjust the current to the operating current of your LED.
4. Adjust the CV trimmer to make the output voltage reach the maximum LED operating voltage. 5. Connect LED, test.
High-power, constant current LED driver; Battery charger; Vehicle-mounted power supply; Low voltage system power supply; solar power supply voltage regulator
Dimensions: 60 x 53 x 22mm (L x W x H)
Color: BLUE
Material:CCL
Non-isolated step down step up CC CV Buck Boost module
Input voltage: DC 5V - 30V
Input current: 6A continuous, 8A max. / 10A peak (with cooling)
Output voltage:DC 1V - 30V
Output current: 5A continuous, 10A max. (with cooling)
Conversion efficiency: ~ 93%
Operating temperature: -40 Celsius to +85 Celsius
TO ADJUST THE MODULE:
Turn trimmers CLOCKWISE to INCREASE, ANTICLOCKWISE to DECREASE.
BATTERY CHARGER APPLICATION – INSTRUCTIONS:
1. First determine the float voltage and charging current required by the battery to be charged (the ‘target battery’).
2. With the target battery disconnected from the module output, apply a voltage of 5V - 30V to the module input, being sure to observe correct polarity.
3. Using the CV trimmer, adjust the output voltage to about 5V. Switch your multimeter into its 10A current scale and measure the module’s short-circuit output current. Turn the CC trimmer to adjust the current to the charging current required by target battery.
4. Using the CV trimmer, adjust the module’s output voltage to the float voltage required by the target battery.
5. Connect the target battery to the module output, obser
DC-DC 12V Step-down to 5V
Adjustable step down power module
With constant current and voltage limiting function, it can also serve as a charger module
USB output supports power charging for iPhone, MP3, MP4, PDA, PSP, etc
Apply the input terminal to car lighter and USB output terminal to your mobile phone, Mp3, Mp4, PDA, etc
Input Voltage:12-16V
Output Voltage:4.8-5.3V ( Approx. 5.3V when no-load)
Output Pattern:Standard USB
Output Current:600-800mA
Short-circuit Protection:Current limiting, self-recovery
Circuit Board Size (L x W x H): about 41 x 17 x 10 mm
