Upgrade your Arctic Cat 250, 300, 400, 450, 550, 650, 700, or 1000 ATV with this 2.5" Level Lift Spacer Kit from JTautoparts. The kit is made in the United States with a polished surface finish and includes upper, rear, lower, left, front, and right placement on the vehicle. The lift kit is perfect for off-road adventures and comes with a manufacturer warranty of one year. This lift kit is specifically designed for Arctic Cat ATVs and is easy to install, making it a great addition to your vehicle. The kit does not affect the overall condition of your ATV and provides improved performance on rough terrain. Improve your riding experience with this reliable lift kit from JTautoparts.

2.5" Silver Front and Rear Suspension Level Lift Spacer Kit For Arctic Cat 250 300 400 450 550 650 700 1000 ATV

Features:

➤Material:  genuine 6061-T6 Aircraft, ensuring this kit is both lightweight and extremely sturdy


➤Designed to give you the extra clearance you need to make it over those challenging obstacles


➤This kit provides a 2.5" lift to front and rear without compromising on performance or ride quality


➤Fit for Arctic Cat 250 300 400 450 550 650 700 1000 ATV Models


➤Package includes : 4x Lift Spacers Kit


Description:


Color : Bright Silver

Material : aluminum

Replacement on Vehicle: Front , Rear


Reminder:


It includes both front and rear Shock Absorber Lift Spacers Kit

the spacers lift about 1.1”at height.


This is a spring compression kit, so you may need a coil spring compression tool to install.


Fitment : Arctic Cat 250 300 400 450 550 650 700 1000 ATV Models


Attention - Installation

 

  1. We recommend that an experienced technician install the products.

  2. Read through the instructions before installing the product.

  3. Thread locking compound should be used on all the bolts. Unless it is specified.

  4. After installing the lift kit, the vehicle handling characteristics will change. Be cautious when operating your vehicle.

 

Preparations:


  1. Secure the ATV so that it does not roll during the installation process. Using a jack and jack-stands, or other suitable equipment to lift the vehicle up.

  2. Starting with any of the four shocks, remove the lower then upper shock mounting bolts, followed by the shock assembly itself.

  3. Using a spring compressor compress the shock spring to remove the retaining plate.

  4. Install one of the spring spacers on the top of the spring coil. Reinstall the retaining plate, it may be necessary to compressor from the spring further in order to reinstall the shock plate.

  5. Remove the spring compressor from the shock assembly and reinstall the shock on the vehicle. Repeat the spring compressor from the shock, make sure all bolts are tight according to factory specification.