Aptiv 12015799 Weather Pack Tower Female Half 6 Conductor Delphi 12015799 5-Pack

  • Aptiv 12015799 Weather Pack Female Shroud Connectors (formally Delphi Packard)
  • Category: Aptiv Weather-Pack Connectors
  • Manufacturer: Aptiv
  • # of Circuits: 6
  • Component Type: Shroud Half
  • Delphi Weather Pack connector bodies are locking nylon and sealed against moisture, dust and dirt
  • Cable seals must be used with mating terminals to create a weather-tight connection
  • Use the cavity plug for all pin locations not filled with terminals
  • Connector body comes with a self-lubricating silicone seal to reduce the engagement assembly force.
  • Weather Pack connectors have a wide temperature from -40 to 257 and can withstand high heat under-hood applications

Weather-Pack locking connectors protect against moisture, dirt and dust.

In order to build a complete connector pair, you also need the mating Tower body, Terminals, Seals and Plugs. Plugs are only needed if you are not inserting wire in each of the contacts.

Installation Instructions:

1)       Slide seal over wire.  (view my listings for seals to make sure you are using the correct size)

2)      Strip wire insulation.

3)      Slide seal to the edge of the insulation.

4)      Crimp terminal and seal. (view my listings for professional grade crimping tool. Cheap crimping tools are available at most auto parts stores).

5)      Place wire and terminal into connector.

6)      Place plugs into unused contacts in connector body.

7)      Close and lock connector body.

8)      Repeat above with mating connector body if you are building a connector pair (both tower and shroud). Push and lock tower and shroud

If your note experienced assembling Weather-Pack connectors, it’s a good idea to get extra terminals and seals. Use a scrap piece of wire to practice crimping and assembly.

These housings are sold without Terminals or Seals. We sell the Terminal/Seal kits and plugs (used to fill any connectors not used) on the listings found below.

20-18 ga Male Terminal for Shroud half with Green Seal   220241375031

20-18 ga Male Terminal for Shroud half with Red Seal   220241376929

16-14 ga Male Terminal for Shroud half with Green Seal   220241378555

16-14 ga Male Terminal for Shroud half with Gray Seal   220242733983

12 ga Male Terminal for Shroud half with Blue Seal  320258553613

See my other listings for other connector bodies, terminals, seals

We also sell a Professional Grade Crimp Tool designed for the Terminals used on these connectors.  320128121139, 320125823330 ( you need both parts to create a complete tool).

We combine orders to offer shipping discounts. If you are also ordering from our other listings, please place the orders in Ebay. But do not pay for them. We would send you a Ebay invoice with the correct discounted shipping

Part Number CE38049