Our Epoxy will leave your projects with a durable, UV resistant, impact resistant high gloss finish. Don't ruin a one-of-a-kind project with an inferior epoxy.
This Ultra/Crystal Clear Epoxy Resin is a 'top of the line' water clear superior performance epoxy system that can be used for so many applications including: —Casting, Jewellery, Surfboards, Bench Tops, Boat repairs, Floor and Bench Top coating— A truly quality multi purpose resin that contains no solvents!
Just look at some of the applications below and you will find that this is the ONE resin for so many applications.:
* Boat manufacture and Fibreglass repairs - it has superior strength, good cures times, fast wet out of Fibreglass and other composite reinforcements and can be even be applied over most other brands of cured epoxies. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results. These resins can also be used with most types of fibreglass (if using Chopped Strand Mat, you will need a special type for Epoxy Resin which is available from us), carbon fibre or kevlar, as well as used over urethane foams and other sandwich core materials.
* Ideal for gloss coating of timber furniture or bench tops and casting items into furniture - The resin has great durability and can be resurfaced should it be damaged in any way. It has a bloom free finish.
* Great for the hobbyist when making Jewellery or items that require a crystal clear resin that possesses Superior durability.
* ARTWORK - absolutely ideal for this type of work
* Surfers, Surfboard repairers/manufacturer's appreciate the UV resistance added to this specially formulated resin.
* Ultra/Crystal Clear Epoxy Resin is ideal for floor coating applications as it is an extremely durable and tough product offering a high gloss finish with minimal coats.
Directions for use: Mix resin and hardener EXACTLY in 2:1 ratio. Using a plastic container for mixing. Do NOT use metal, especially aluminium containers to mix. Mixtures will turn milky colour in aluminium containers. The plastic container must be extremely clean, free of dirt; water; oil; and other contamination. Tiny contamination would deteriorate the quality of final result. Once the product is poured into the mould, do not stir it or touch the surface to avoid defects. Most foam will float to the surface and burst itself. Do not use flame torches. The curing will take 20 to 48 hours.
Following factors affect the curing time:
Mixing quantity (the more you mix, the fast it cures and vice versa)
Room Temperature (higher room temperature will speed up the curing)
Mixing ratio: 2:1 (2 Parts A and 1 Part B)
Application temperature: Wide temperature range through summer to winter
Pot life: 2-4 hours (Data based on 100ml mixing; 20 degree C room temperature). Please pour this product into mould as soon as possible, to avoid bubbling.
Time to reach non-tacky: 10-30 hrs Depending on the room temperature (Data based on 100ml mixing)
Time to reach full cure: 48 hrs (Data based on 100ml mixing)
Viscosity: 600 cps for Part A (Brookfield 20 rpm)
450 cps for Part B (Brookfield 20 rpm)
Clarity: Pt-Co value < 10 for both Part A and Part B
Compatibility: Binding to metal, inorganic materials including cement; stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.
Available order quantity: 750 Mls, 3 Ltr, 6 Ltr 30 Ltr 300 Ltr
Shelf life: 12 months
Manufactured in Australia by Eparency
For material safety sheet, please msg us to refer SDS, not to be swallowed, keep away from children
CAUTION:
All epoxy share the same chemical natural. Treat this like other epoxy.
DONOT SWALLOW. DONOT CONTACT. Use all necessary PPE. KEEP AWAY FROM
CHILDREN.