4x BRISK "FR14YC Gap 0.7mm"

Single Point Copper Electrode Upgrade Spark Plugs

fit: Old Ford Pinto engines 1.6,1.8 and 2.0 with M18 spark plugs


FR14YC Replaces the following Spark Plugs
BOSCH = DR6BC, DR6BP
CHAMPION = OE053, OE054, RF7YC, RF7YCC
NGK = AP7FS

See my other listing for other temperature plugs for Pinto Engines

(Warning)
If your Vehicle has any Modifications/Tuning/Mapping then Dyno Tuning or Re-Dyno Tuning
must be done or re-done with the BRISK spark plugs fitted at the time of Tuning/Mapping to avoid any issues.
-
Failure to so will cause Issues, Misfires, Hesitation and Spark Plug Fouling/Damage.
-
Some Tuned Engines require Different Temperature spark plugs - Contact your tuner for advice.
-
Vehicles with any issues or faults such as spark plug Fouling, Hesitation, Misfires, etc.
must be resolved and fixed before fitting the BRISK spark plugs.

Spark Plug Specifications:
Socket Size = 21 mm Hex
Thread length = 11.2 mm Reach
Tread Size = M18 x 1.5 mm Thread
Terminal/Cap = Threaded Removable Terminal
Seat Seal = Tapered Seat 
Maximum Tightening Torque = 20-30Nm
Heat Rated = Ngk 7, Brisk 14
Pre-Gapped = Ready to Fit
Spark Plug Gap = 0.7mm


BRISK is Rated as No-1 in the Racing World
Supplying High End spark plugs for all types of Racing including for every day road vehicles
Brisk are an Alternative - Aftermarket Upgrade Replacement to other brands such as
Bosch, Champion, Denso, Delco, Ngk and many others


>>> For all other types of BRISK and PULSTAR spark plugs" = See my eBay shop listings <<<
.