100 Pieces with a drill bit
1/4" x 3-3/4" Phillips Flat Head
1/4" x 3-3/4" Phillips Flat Head
410 STAINLESS STEEL FEATURES AND BENEFITS
- Stainless steel finish provides a decorative aesthetic and superior corrosion resistance.
- 30% lower installation torque and 20% more holding power eliminates head snapping.
- Finished head gives a low, uniform profile and aesthetic appeal.
- Close-to-edge placement. No expansion or outward pressure allows installation near a concrete’s edge without cracking.
- Easily reversible and removable. No inserts required.
- Made in the U.S.A.
BENEFITS
- Patented Advance Threadform provides superior pull-out performance.
- Application of coating adds extra corrosion protection.
- 30% less installation torque; 20% more holding power.
- Reversible and removable.
- Building code approved.
FEATURES
- 410 grade stainless steel with C4 top coat for added corrosion protection
- Suitable for concrete, brick and hollow-block applications
- Suitable for some preservative-treated wood applications
- Available in lengths from 1 1/4" to 4"
MATERIAL
Heat-treated 410 stainless steel
- Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/2" to allow the thread tapping dust to settle and blow it clean using compressed air. Overhead installations need not be blown clean. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling and tapping.
- Position fixture, insert screw and tighten using drill and installation tool fitted with a hex socket or phillips bit.
Preservative-treated wood applications: Suitable for use in non-ammonia formulations of CCA, ACQ-C, ACQ-D, CA-B, SBX/DOT and zinc borate. Acceptable for use in exterior environments. Use caution not to damage coating during installation.
Call or email us for all your Simpson Strong-Tie needs. We are one of SW Florida's LARGEST supplier!!
On Jan-01-18 at 13:26:29 PST, seller added the following information:
