|
Dear customer,
When there might be a difference between the automatic generated specifications by the Ebay system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.
Used, looks like new.
see photos
Specifications:
Port Attributes
48 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports with PoE+ (IEEE 802.3at) per port; Supplies up to 30.8W per port (with optional external MPS-1000 power supply; otherwise, if ports are not used for PoE+, MPS-1000 acts as a redundant supply) on all 48 ports.
4 Combo (SFP or 10/100/1000) Gigabit Ethernet ports;
Two 10Gb/Stacking Module Bays
Optional 10Gb Modules: Dual-Port 10 Gigabit Ethernet uplink modules with SFP+ or 10GBASE-T
Optional 64Gbps Stacking module
USB Port – Allows for file import/export locally
Auto-negotiation for speed, duplex mode and flow control
Auto MDI/MDIX
Port mirroring
Broadcast storm control
EEE (IEEE802.3az) per port settings
Port Profile support
iSCSI Auto Config
UDLD
Port Profile support including Admin profiles
sFlow
Performance
Switch Fabric Capacity 224.0 Gbps
Forwarding Rate 160 Mpps
Up to 32,000 MAC Addresses
Availability
Spanning Tree (IEEE 802.1D), Multiple Spanning Tree (MSTP) and Rapid Spanning Tree (IEEE 802.1w) with Fast Link Support
Spanning Tree optional features – STP root guard, BPDU guard, BPDU filtering
Supports Virtual Redundant Routing Protocol (VRRP)
Dual Image Support
Configuration file upload and download (USB supported)
Switch Auditing support
sFlow support
External redundant power support with PowerConnect MPS-1000 (sold separately)
Cable diagnostics via Virtual Cable Tester
SFP/SFP+ transceiver diagnostics
High availability and redundancy
HA stacking and redundant power supply option
Stacking capability
Up to 12 switches managed as a single unit, including the PowerConnect M6348 I/O Modules
Energy conscious and Power over Ethernet
High-efficiency 80 PLUS-certified power supplies in a system designed to meet Energy Efficient Ethernet (EEE) standards, helping reduce power requirements during low link use. PoE+ enables the network to power VoIP, WLAN APs and badge readers.
Management
Industry-standard CLI accessible via Telnet, Out-of-Band Ethernet, SSH, or local console (RJ45 Yost)
Robust HTTP GUI Management
sflow
Management IP Address Conflict Notification
SNMPv1, SNMP v2c, SNMP v3 supported
USB Drive Support: Auto-Configuration, Firmware
4 RMON groups supported (history, statistics, alarms and events)
HTTP and TFTP transfers of firmware and configuration files
Dual Firmware images on-board
Multiple Configuration file upload/download supported
Statistics for error monitoring and performance optimization including port summary tables
BootP/DHCP IP address management supported
DHCP Auto Configuration, DHCP Auto Image Upgrade
LLDP-MED Support
SNTP Support
Layer 3 Traceroute
Telnet Client
Syslog remote logging capabilities
iSCSI Auto Configuration
If something is not on the picture it's not included unless stated otherwise. |
 |
