Ozone Reactor O300 (300gals/ 1300l) 

https://youtube.com/shorts/6QuGE29iJmA?si=KG0w7pbmksjI7ldi

The Ozone reactor works by mixing the water and ozone under pressure within a reactor ... using the wet and dry method, and with reverse flow to allow greater contact time between water and ozone. 

For greater efficiency now we use a Venturi type manifold with this reactor.  The allows pre-mixed the water and ozone before entering the ozone reactor chamber, allowing greater gas exchange and oxidation of organic material than simply bubbling ozonated air through a column of water.

The O300 can be fitted Externally, in cabinet, below aquarium or Externally or Internally in sump.

Kit includes:

O300 Reactor,  Carbon, Reactor 75, Carbon Media, Venturi, 12mm control valve, 12mm flexi piping (2m)

Please state on purchase if you would like a hang-on bracket fitted to the Carbon Reactor... as the reactor will be sent without a bracket otherwise.

Requirements: Water and Air pump and an ozone generator. Plus a no return to be fitted between ozone generator and Venturi inlet.

Water Pump requirement : 500lph - 800lph

Air Pump requirement : 300lph

Hosetails:

Inlet 12mm and Outlet 12mm on both the Ozone and Carbon reactors.

Dimensions

Height            : 600mm

Footprint       :135 x 135 mm

Chamber Dia: 90mm