You may also like
EPEVER MPPT Solar Charge Controller,Tracer-AN Series.
40A/30A,12V/24VDC AUTO,
Max 100V PV Input,with LCD display.
Battery : LiFePO4 Lithium Battery And Lead Acid Battery
About this item
Negative Grounding Design and advanced MPPT control algorithm make it charging efficiency no less than 99.5%, it maximize the charging power as a way of saving the energy.
100V Max PV Input allow you connect 4 x12V solar panel connecting in series, it minimize the charging current on solar panel 's leads to save power loss.
Compatible with LiFePO4 & Li(NiCoMn)O2 Batteries, with built in preset lithium battery type, it's not require setting charging parameters for lithium batteries.
Work with both 12v battery system and 24v battery system, It allows 24V Solar Panels (or Even Higher Voltage) Charging 12v/24v Battery
Standard Modbus communication protocol with RS485 interface , it can be monitored by cellphone APP(eBox required) , PC Software and MT50 remote meter
Product Feature
MPPT tracking efficiency above 99.5%
Maximum charge conversion efficiency as high as 98%
Support lead-acid and lithium-ion batteries
Multiple load work modes
Charging power and current limitation
High-temperature charging power derating function
Standard Modbus communication protocol with RS485 interface
Real-time energy statistics
Negative Grounding Design
100V PV input allows more panels connected in series
Work with LiFePO4 Lithium Battery And Lead Acid Battery
Something you should know for Lithium Batteries Charging
When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.
When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.
Electronic protections:
• PV reverse polarity protection
• PV short circuit protection
• PV over current alarm protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load short circuit protection
• Load overload protection
• Overheating protection
| Model | Tracer3210AN | Tracer4210AN |
| Nominal system voltage | 12/24V auto work | |
| Rated battery current | 30A | 40A |
| Rated load current | 30A | 40A |
| Max. PV open circuit voltage | 100V | |
| Max. battery voltage | 32V | |
| Max. PV input power | 390W (12V) | 520W (12V) |
| 780W (24V) | 1040W (24V) | |
| Equalize charging voltage | Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V | |
| Boost charging voltage | Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V | |
| Float charging voltage | Gel /Sealed /Flooded: 13.8V | |
| Low voltage reconnect voltage | Gel /Sealed /Flooded: 12.6V | |
| Low voltage disconnect voltage | Gel /Sealed /Flooded: 11.1V | |
| Self-consumption | ≤20mA(12V) ≤16mA(24V) | |
| Grounding | Common positive | |
| Temp. compensation | -3mV/℃/2V | |
| Communication Port | RS485 / RJ45 interface | |
| Working temperature | -25℃～+45℃ | |
| Storage temperature | -35℃～+80℃ | |
| Humidity | ≤95% N.C. | |
| Enclosure | IP30 | |
| Overall dimension | 228x164x55mm | 252x180x63mm |
| Terminal | 10mm2 | 10mm2 |
| Net weight | 1.2kg | 1.9kg |
