This Kit is a (1) 2" Dead End X 2" Slip X (6) 3/4" Barbs manifolds, (2) 2" Spigot/Street X 2" Slip X (6) 3/4" Barbs, Connect Barbs, clamps with a Coupler Kit. 

For a limited Time we are offering a Free Vinyl Tubing Cutter that cuts 1/4" to 1" Clear Tubing and is perfect for doing these Manifold replacements.. Limit one per order.. 

The Kit consists of 30 Barbs with (5) Manifolds total with (4x6) 3/4" Barbs 30 Outputs, (3) 3/4" Plugs to cut the manifolds down to 29, 28 or 27 outputs, a 2" Coupler, 6" of 2" Soft Pipe, (60) 3/4" Clamps and 90" of Clear 3/4" Tubing so you have about 3" per extension. 

The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side.