Tech specs
SeriesStreetMax. Axle Load FA
-790 kgMax. Axle Load RA-890 kgLowering FA40 - 85 mmLowering RA15 - 65 mmHousinggoldCamber / top mount FAyesCamber / top mount RAyesMain spring rateGWFE96 (60 N/mm)GWFE06HA (46 - 90,1 N/mm)Helper spring rateGWHE02 (20 N/mm)TUV Certificateno
-790 kgMax. Axle Load RA-890 kgLowering FA40 - 85 mmLowering RA15 - 65 mmHousinggoldCamber / top mount FAyesCamber / top mount RAyesMain spring rateGWFE96 (60 N/mm)GWFE06HA (46 - 90,1 N/mm)Helper spring rateGWHE02 (20 N/mm)TUV CertificatenoComments
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.32 - In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.33 - Including M-Technik.73 - For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.
Download materials
Download spare parts listDownload spare parts listDownload installation manualDownload installation manualDownload camber assembly manualDownload camber assembly manualDownload GPSR brochureDownload GPSR brochureDownload GPSR stickerDownload GPSR sticker
Product description
Coilover Kit Street BMW Z4 Coupe (E86)
Coilover Kit Street MTS Technik for BMW Z4 Coupe (E86), lowering the front axle between 40 - 85 mm, and rear between 15 - 65 mm. Dedicated for the years of: 03/06 - 12/09, for the engine version: 3.0 si.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
2 year warranty with no mileage limit to confirm high quality.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
A complete set ready for assembly, also including sway bar links, adapted for lowering.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.