Add an outdoor adventure theme to your favourite jacket or bag with this 100mm Hiking Club embroidered patch.

A winding tan path leads through green pine trees towards white mountain peaks, with an orange sun above. Bold white “HIKING CLUB” lettering stands out against the black background, framed by a green inner ring and thick black border.

• Size: 100mm diameter (10cm).
• Iron-on backing — can also be sewn on.
• Ideal for jackets, backpacks, tote bags and textile craft projects.
• A gift idea for walkers, trekking enthusiasts and outdoor explorers.
• Embroidered in-house in the UK.
• Supplied individually: one patch.

PLEASE NOTE – MADE TO ORDER

These patches are embroidered to order, rather than being mass-produced stock. Please allow up to 3 working days for us to manufacture your patch before dispatch.

Iron-On Instructions

1. Make sure the garment is clean, dry and suitable for ironing.
2. Place the patch in the required position with the embroidered side facing upwards.
3. Cover the patch with a thin cotton cloth or pressing cloth.
4. Set your iron to a medium/high heat setting with NO STEAM.
5. Press firmly over the patch for approximately 20–30 seconds. Do not move the iron backwards and forwards.
6. If possible, turn the garment inside out and press the reverse side of the patch for a further 20–30 seconds.
7. Allow the patch to cool completely before checking the bond.
8. Repeat briefly if necessary.

For items that will be washed frequently, or for extra security, we recommend adding a few stitches around the edge of the patch after ironing.

Important: Some synthetic, waterproof, coated or heat-sensitive fabrics may not be suitable for ironing. Always check the garment manufacturer's care instructions first. If in doubt, sew the patch on instead.