Looking for a rugged, heavy-duty lighting retrofit that eliminates ballasts once and for all? Most commercial light failures are caused by overheated ballasts rather than the bulbs themselves. Continuing to replace old fluorescent lamps without bypassing the ballast is an expensive, recurring mistake.
Our Heavy-Duty 48-Inch T8 LED Replacement Tubes (25-Pack) provide a permanent, commercial-grade solution. Featuring an aluminum structural heat sink and shatterproof diffusers, these lamps operate on a ballast bypass setup to supply consistent, high-lumen 6000K white light in any temperature.
Save hours of maintenance time. Once the ballast is bypassed, your fixtures operate smoothly without the hum, flicker, or delayed starting common to traditional commercial fluorescent ballasts.
Why Upgrade to Our Double-Ended Ballast Bypass Tubes?
- Universal Type B Ballast Bypass: Compatible with any standard 4-foot fluorescent fixture once the ballast is bypassed and disconnected. Ballast bypass operation maximizes driver reliability.
- Double-Ended Tombstone Compatibility: Works reliably with both shunted and non-shunted sockets, allowing you to reuse your existing troffer or strip light hardware.
- Pure 6000K Daylit Atmosphere: Engineered to provide a clean, modern white light that eliminates yellowish tones and improves worker alertness across busy facilities.
- Vibration & Shock Resistant: Rugged polycarbonate lens and solid-state internal components withstand industrial equipment vibrations that normally break delicate fluorescent filaments.
- Instant Full Output: Delivers instantaneous, 100% lumen output at flip of switch with zero buzzing, humming, or cold-temperature strobing.
- 25-Piece Commercial Lot: Sized perfectly to retrofit multiple 2-lamp or 4-lamp commercial fixtures uniformly without mixing different batches or color temperatures.
Ideal Applications for This 25-Pack Lot:
Specifically configured for facilities that require high visual contrast, long-lasting reliability, and zero ongoing maintenance:
- Commercial Production & Assembly Lines: High lumen output keeps workers focused and reduces assembly errors.
- Equestrian Stables, Pole Barns & Outbuildings: Resists cold weather starting issues and mechanical vibrations from livestock equipment.
- Commercial Printing & Quality Control: 6000K pure daylight delivers accurate color discrimination and contrast detection.
- Multi-Car Garages & Home Workshops: Replaces dull 32W fluorescent lamps to turn dark residential garages into bright professional workrooms.
Product Data Sheet:
| Product Classification | 4-Foot T8 LED Replacement Lamp |
| Quantity Included | 25x Tubes in Reinforced Master Carton |
| Installation Type | Dual-Ended Power (Must Bypass Ballast) |
| Color Appearance | 6000K Pure Daylight White |
| Operating Voltage | AC 120V - 277V (Mains Connection) |
| Lampholder Support | G13 Tombstones (No Socket Rewiring Needed) |
| Thermal & Lens Build | Aviation-Grade Aluminum Backing + Frosted PC Lens |
| Equivalent Output | Replaces 32W - 40W Traditional Fluorescents |
Contractor Ballast Bypass Guide:
Complete your facility retrofit in minutes per fixture with standard double-ended ballast bypass:
- De-Energize Circuit: Flip off the dedicated circuit breaker before servicing fixtures.
- Bypass Ballast: Open fixture channel cover. Cut out the old electronic or magnetic ballast and remove it completely from the fixture housing.
- Connect Mains Across Opposite Ends: Run incoming 120V-277V Hot wire to the socket leads on end 'A'. Run incoming Neutral wire to the socket leads on end 'B'.
- Seat Tubes: Fasten the channel cover securely. Insert the 4FT LED tubes and twist 90 degrees into position. Re-energize circuit.
Frequently Asked Questions:
Q: Do I need to replace my existing tombstone sockets?
A: No! Because these tubes use Double-Ended Power, they work seamlessly with both shunted and non-shunted sockets. You do not need to buy, replace, or rewire new tombstones once you bypass the ballast.
Q: Can I leave the ballast inside the fixture?
A: No. You must bypass the ballast. The old ballast must be completely disconnected or removed. Powering these lamps through an active ballast will cause internal driver failure and voids the warranty.
Q: How do these tubes perform in cold environments?
A: Unlike fluorescent tubes that struggle, hum, or refuse to start in the winter, solid-state LED tubes ignite instantly at 100% brightness down to sub-zero temperatures.
All purchases after 12 pm will be shipped next business day.
Check out our other items by visiting our eBay Store!
