Generac 7006 100 Amp Load Manager, Gray

• BROAD GENERATOR COMPATIBILITY: Works with any single-phase standby generator that produces standard 60 Hz AC output, including Generac air-cooled and liquid-cooled models single-phase 240V only, not for three-phase systems
• SCALE UP TO 8 MODULES PER SYSTEM: Install up to eight 100A Load Managers on a single generator system to manage multiple large appliances independently, with each module requiring a unique priority number
• WIRE-FREE FREQUENCY SENSING TECHNOLOGY: No control wires to the transfer switch are needed; the module monitors generator output frequency autonomously and sheds loads the moment Hz drops below threshold
• NEMA 3R RATED FOR INDOOR OR OUTDOOR MOUNTING: Enclosure withstands rain, sleet, and ice formation across an operating range of -22 F to 122 F, sized at 7.0"H x 11.4"W x 5.3"D for flexible placement
• 8-LEVEL PRIORITY DIAL FOR CUSTOMIZED LOAD RECOVERY: Assign each module a unique priority 1 8; lower numbers recover power first after a shed event, with each step adding a 15-second staggered delay to prevent re-overload
• GENERATOR LOCKOUT MODE BLOCKS NON-ESSENTIAL LOADS: Set any module to lockout to permanently prevent that appliance from drawing generator power during an outage, while still allowing it to run normally on utility power
• EXTERNAL LED STATUS DISPLAY WITH 5 CODED STATES: Diagnose system status without opening the enclosure; solid green means load connected, 1-second flash means startup delay, and 3-second flash means 30-minute overload lockout is active
• WHAT'S INCLUDED: 100A Load Manager module with built-in frequency-sensing intelligence, priority label decal, and owner's manual; no separate controller required for standalone operation