Original OEM engine control and immobilizer module set for BMW X5 E70 4.8i / xDrive48i with N62 4.8L gasoline engine.
This is a matched starting kit supplied with its original programmed key. The supplied security components are already matched to each other. The kit is ready to install and start the engine in a compatible vehicle; separate immobilizer matching or key programming is not required for the supplied matched set. Please send your VIN and clear photos of your original module labels before purchase so we can confirm vehicle compatibility.
This listing is for a genuine used OEM BMW DME / ECU, CAS3 ignition and immobilizer module, VVT Valvetronic control module, smart key, and wiring connector set removed from a BMW X5 E70.
This is a matched electronic set from the same vehicle. Suitable for replacing damaged, faulty, water-damaged, or non-working original engine control, immobilizer, and Valvetronic electronics.
The main engine control unit is a Bosch Motronic DME ME9.2.2 with visible BMW part number 7586909.
The set also includes the original Siemens VDO CAS3 module, BMW smart key, and Siemens VDO VVT Valvetronic control module.
All parts are original BMW / Bosch / Siemens VDO units, not aftermarket replacements.
Please check all photos carefully before purchase. You will receive exactly the parts shown in the photos.
⸻
Fits:
BMW X5 E70
BMW X5 4.8i / xDrive48i
N62B48 / N62N 4.8L gasoline V8 engine
Bosch Motronic ME9.2.2 DME system
CAS3 ignition and immobilizer system
Siemens VDO VVT Valvetronic control system
Approximate model years:
2007–2010 BMW X5 E70 4.8i / xDrive48i with N62 4.8L engine
May also fit certain other BMW models equipped with an N62 engine, Bosch ME9.2.2 DME, CAS3 system, and compatible VVT module, but compatibility must be confirmed by part number, engine version, vehicle equipment, transmission, CAS type, and vehicle configuration.
Not for N52, N53, N54, N55, N63, diesel, or other engine versions unless all part numbers and specifications match.
Fitment may vary depending on production year, market, body version, engine type, transmission, immobilizer system, and vehicle specification.
Please confirm compatibility by part number before purchase. Do not rely on model or year only.
⸻
Visible OEM / part numbers from the photos:
BMW: 7 586 909-01
Short number: 7586909
BMW full number: 12 14 7 586 909
Bosch: 0 261 209 352
Bosch short number: 0261209352
DME type: Bosch Motronic ME9.2.2
Additional visible DME markings:
Bosch Motronic: 344 0514
Visible production marking: 08-02-21
Additional number: 1039S25825
Made in Germany
BMW: 61.35-9147217-01
Short number: 9147217
Additional number: 2080570929
CAS type: CAS3
Siemens VDO: 5WK4 9514VBR
Additional visible CAS information:
MCV: 00.00.00
FSV: 2.3.8
OSV: 3.3.0
HW Index: C4
Software Index: 18.6
Coding Index: 08
Diagnostic Index: 06A0
FCC ID: KR55CAS3
IC: 2671-CAS3
BMW: 7 575 654
Short number: 7575654
Additional BMW number: 7 575 656
Additional BMW number: 7 507 492
Siemens VDO VVT: 412 265 002/006
Additional visible VVT markings:
H2O S01
0065
K20
08-03-02
0001
Made in Germany
Other visible markings:
BMW AG
Bosch Motronic
Siemens VDO Automotive
Made in Germany
DME ME9.2.2
CAS3
VVT
Please compare all numbers, connectors, modules, software type, engine type, transmission, and vehicle equipment with your original parts before purchase.
⸻
Included in this listing:
1x Bosch DME / ECU / Engine Control Unit — ME9.2.2
1x Siemens VDO CAS3 ignition and immobilizer module
1x Original programmed BMW smart key
1x Siemens VDO VVT Valvetronic control module
Wiring pigtails / connectors shown in the photos
Total: matched engine control, ignition, immobilizer, key, and Valvetronic electronic set as shown in the photos.
You will receive exactly the parts shown in the photos.
No additional modules, locks, antennas, key readers, Start / Stop buttons, complete wiring harnesses, ignition parts, Valvetronic motors, or accessories are included unless shown in the photos.
⸻
Used OEM condition.
The parts show normal signs of use and storage, including:
Surface scratches
Dust and storage marks
Cosmetic wear
Marks and residue on the aluminum housings
Scratches on the CAS module housing
Used mounting points
Wear on the identification labels
Used electrical connectors
Cut wiring pigtails as shown in the photos
Normal wear on the key housing
Normal wear for used original electronic modules
The modules and included components appear physically complete in the photos, but please inspect all photos carefully for exact condition.
This is a used electronic control unit set.
⸻
Compatibility must be confirmed by part number only.
Part numbers may vary between similar vehicles, even when the model, engine size, or functionality appears to be the same.
Professional installation is recommended. The supplied security modules and original key are already matched.
This is a matched DME / CAS3 / key / VVT set, but correct operation also depends on the rest of the vehicle systems being compatible and in good working condition.
The included key blade may not match your vehicle’s mechanical door lock. Remote-control and Comfort Access functions may also require additional programming or adaptation.
Please compare your original part numbers with:
7586909
0261209352
9147217
5WK49514VBR
7575654
412265002/006
If your part numbers are different, please verify fitment before purchase.
We can help check compatibility by VIN before purchase.
⸻
Worldwide shipping available.
The modules, key, connectors, and wiring pigtails will be carefully packed to protect the housings, labels, plugs, and electronic components during transport.
Shipping time depends on the destination country and selected shipping method.