eSUN Wasserlösliches PVA Filament 1.75 mm, 3D Drucker PVA Filament, Maßgenauigkeit +/- 0.05mm, 0.5kg Spule (1.1 LBS) Unterstützungs Material für 3D Drucker, Natürlich

Merkmale:

 

Wasserlösliches PVA: PVA ist ein wasserlösliches hochmolekulares Polymer mit guter Wasserlöslichkeit. Leicht abzuziehen, bedruckte Oberfläche nicht beschädigen. Gute Haftung an verschiedenen Materialien wie PLA. Umweltfreundlich und ungiftig. Ideal für komplexe Drucke!


Stabile Dimensionstoleranz: Minimale Toleranz und geringes Verziehen, um eine gleichmäßige Zufuhr und stabile Drucke zu gewährleisten, gute Schichthaftung, weniger Fadenbildung, keine Blasen, einfache Handhabung, was zu einer hervorragenden Oberflächengüte führt und hochpräzise ist.


Verwicklungsfrei und Kein Verstopfen: Volle 0,5 kg 3D-Drucker Filamentrolle, perfekte Rundheit und sehr enge Durchmessertoleranz, gute Wicklung, überlappt oder verheddert sich nicht. Gut schmelzen, gleichmäßig und konstant zuführen, ohne die Düse oder den Extruder zu verstopfen.


Stützmaterial: Ermöglicht dank seiner Wasserlöslichkeit den Druck komplexer Modelle und mobiler Konstruktionen, die nicht mehr aus Einzelteilen zusammengesetzt werden müssen. Waschen Sie die Stützstruktur einfach weg, indem Sie das Modell in Wasser eintauchen.


Vakuumversiegelte Verpackung: Filament Nettogewicht: 0,5 kg. eSUN Filament wird in einem versiegelten Vakuumbeutel mit einem Trockenmittelbeutel geliefert. Halten Sie Ihre 3D-Druckerfilamente einfach in einem optimalen Lagerzustand und frei von Staub oder Schmutz, bevor Sie die vakuumversiegelte Verpackung öffnen.

 

Parameter:

 

Material: Polyvinyl-Alkohol

Artikeldurchmesser: 1.75 millimeters Millimeter

Artikelgewicht: 500 Gramm

Farbe: A-Naturlig

 

 

PVA Filament Print Parameter:

  • Thanks to its solubility in water, it is ideal as a support material, since the support structures can be washed away by water.
  • A dissolution of the material at a water temperature of 21°C takes several hours. The dissolution time can be significantly reduced by increasing the temperature.

 

PVA Filament Print Parameter:

  • Printing Temperature: 180-230℃(Recommend 190℃)
  • Bed Temperature: 45-60℃
  • Density: 1.25g/cm3
  • Tensile Strength: 22MPa
  • Elongation at Break: 360%

 

Package Contents:

 

0.5KG PVA Filaments

 

 

Why Need Support Material in 3D Printing?

 

  • If you have a printer with two extruders, you can load one extruder with PLA for printing the model and the other one with a water-soluble material like PVA or limonene soluble material like HIPS for printing the support structure.
  • Once printing is over, simply wash away the support structure by immersing the model in water or Limonene.
  • This method of removal reduces the risk of model damage and makes the post-processing work easier. Ideal for complex prints!
  • Support structures are a necessary evil in 3D printing. You need them to print difficult overhangs and bridges in your model.

Item Specifics
EAN :Nicht zutreffend
Marke :ESUN
Produktart :Filament
Material :PVA
Farbe :Natur
Faserdurchmesser :1,75 mm
Modellkompatibilität :Für Dualdrucker
Modellkompatibilität :For Dualdrucker

We accept PayPal payment ONLY. Payment is required within 4 days. Item(s) will be shipped immediately within 1-3 business day of receiving full payment. Shipping directions left in PayPal Notes will NOT be considered. Please contact us directly if you have a special request.

Shipping Day are Monday to Friday, excluding Saturday, Sunday and Holiday declared by the carrier. Your order will be ship out within 1-3 business days.

Please ensure your shipping address is correct before ordering. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.

1.We offer 30 days return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product and would like to return.

2.All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.

3.We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement

4.Buyer is responsible for return shipping cost.

All eBay messages will be replied within 24 hours or sooner during working days.

Your satisfaction is our priority. If you have any questions about the products, please feel no hesitation to contact us, we will try our best to solve them.

Looking forward to your messages!

eSUN is a global leading 3D printing material brand founded in 2002. Specializing in high-quality filaments (PLA+, PETG, ABS, TPU) and photopolymer resins, we deliver reliable, consistent, eco-friendly products for hobbyists and professionals. Sold to over 100 countries, our materials feature excellent printability, strength, and wide applications in design, education, and industry. Trusted worldwide for quality and affordability, eSUN empowers your creative 3D printing projects.


All rights reserved.