EPODEX Epoxy Resin Kit – PRO Series for Coatings, Art, Crafting, Jewellery, Lamps, River Tables and More, Crystal Clear Epoxy Resin for Pours up to 2 cm, 5 cm and 10 cm

EPODEX Epoxy Resin Kit – PRO Series for Coatings, Art, Crafting, Jewellery, Lamps, River Tables and More, Crystal Clear Epoxy Resin for Pours up to 2 cm, 5 cm and 10 cm
EPODEX Epoxy Resin Kit – PRO Series for Coatings, Art, Crafting, Jewellery, Lamps, River Tables and More, Crystal Clear Epoxy Resin for Pours up to 2 cm, 5 cm and 10 cm

How to use EPODEX Epoxy Resin?

1
 Step 1: Prepare

Step 1: Prepare

  • The surface/mould should be dry, clean, and free of grease.
  • The temperature of the room, material, and substrate should not be too cold, as this will allow air bubbles to disappear on their own (ideal: 20°C).
  • The humidity in the air should not exceed 60% to avoid white marks.
2
 Step 2: Prime

Step 2: Prime

  • For porous surfaces, apply a coat of primer to prevent material loss and the formation of air bubbles.
  • To do this, mix the resin and hardener, apply the mixture to the surface using a roller or brush, and then allow it to cure.
3
 Step 3: Add Coloured Pigments

Step 3 (Optional): Add Coloured Pigments

  • Add the pigments before mixing.
  • Recommended pigment/dye amounts for 1 kg of resin + hardener: metallic, neon, pearlescent, and phosphorescent pigments: about 1.5% (15 g); transparent colours (except white, black, and grey): 20-60 drops (0.6-1.8 g); solid colours: 1% (10 g).
4
 Step 4: Mix

Step 4: Mix

  • Mix the resin (A) with the hardener (B) in a 2:1 weight ratio (e.g., 2 kg of resin : 1 kg of hardener).
  • Move the mixing stick along the sides and bottom of the container to ensure all material is mixed, as unmixed material can settle there.
  • Pour the mixture into a clean container and mix again to ensure the material will cure properly.
5
 Step 5: Pour

Step 5: Pour

  • Pour the material immediately after mixing, as it may begin to heat up in the mixing container.
  • Maximum pour height for each product: Option A (PRO) – 2 cm; Option B (PRO+) – 5 cm; Option C (PRO MAX) – 10 cm.
  • When pouring close to the maximum pouring height, we recommend keeping the temperature between 17-20°C.
6
 Step 6: Let Cure

Step 6: Let Cure

  • The material is mechanically cured—walkable, touch-dry, and ready for demoulding at 20°C—after 20 hours (PRO), 48 to 72 hours (PRO+), and 72-96 hours (PRO MAX).
  • Full chemical curing is achieved after approximately 7 days (PRO) and 14 days (PRO+ and PRO MAX). During this period, the epoxy resin must not come into contact with water.
  • If desired, you can sand your epoxy resin and finish it with oil, wax, varnish, or a polyurethane resin.

Find the perfect resin for your project

Feature
Featured
EPODEX PRO Series Clear 		EPODEX PRO Series RAL ↗ EPODEX ECO Series Clear ↗ EPODEX ECO Series RAL ↗ EPODEX ECO Series Transparent Colours ↗ EPODEX ECO Series Metallic ↗
Casting Height Up to 2cm, 5cm, 10cm Up to 2cm, 5cm, 10cm Up to 1cm, 5cm, 10cm Up to 1cm, 5cm, 10cm Up to 1cm, 5cm, 10cm Up to 1cm, 5cm, 10cm
UV protection ✔ ✔ ✘ ✘ ✘ ✘
Colour / Colour Effect Clear RAL Colours Clear RAL Colours Transparent Colours Metallic Colours
Clear / Crystal Clear Crystal Clear Epoxy Resin Crystal Clear Epoxy Resin Clear Epoxy Resin Clear Epoxy Resin Clear Epoxy Resin Clear Epoxy Resin

See It In Action

EPODEX Epoxy Resin PRO Series Video 1

▶ Watch video on YouTube

 EPODEX Epoxy Resin PRO Series Video 2

▶ Watch video on YouTube
EPODEX Epoxy Resin PRO Series Video 3

▶ Watch video on YouTube

 EPODEX Epoxy Resin PRO Series Video 4

▶ Watch video on YouTube

Product Information

  • OPTION A: The "PRO" Premium Craft Resin Kit is perfect for artistic, craft, and crystal clear coatings up to 2 cm in thickness at around 20°C. For smaller moulds (e.g., 10 x 10 cm) and lower temperatures (15°C), pours up to 5 cm are possible. Ideal for coatings, sealing, repairs, mould making, art, and crafting
  • OPTION B: The "PRO+" Premium Casting Resin Kit is designed for river tables and crystal clear pours up to 5 cm at around 20°C. For smaller silicone moulds for resin (e.g., 10 x 10 cm) and at 15°C, pours up to 30 cm can be achieved. This deep pour resin is ideal for creating resin tables, lamps, furniture, and other moulded decorative items. Perfect for medium-sized projects with shapes and volumes
  • OPTION C: The "PRO MAX" Premium Deep Pour Epoxy Resin is suitable for pours up to 10 cm at around 20°C. In smaller moulds for resin casting (e.g., 10 x 10 cm) and at 15°C, it allows pours up to 50 cm. Designed for large river tables, furniture, and large-volume decorative items. Ideal for projects with very high pours
  • SPECIAL CHARACTERISTICS: Our Epoxy Resin meets the highest quality standards: crystal clear resin, bubble-free (self-venting), self-levelling, solvent-free, low-odour, BPA-free, VOC-free, UV-stabilised, chemical-resistant, phthalate-free, and easy to use
  • APPLICATION: Mix the resin (component A) with the hardener (component B) in a 2:1 weight ratio (e.g., 2 kg of resin to 1 kg of hardener). Optionally, add our EPODEX pigments for colouring. Pour immediately onto the surface to be covered and allow it to cure