THIS LISTING WILL INCLUDE:
ABOUT THIS KIT
MOST COMPLETE TSP STAGE 2 HIGH LIFT CAM KIT – Texas Speed TSP Stage 2 High Lift Truck Camshaft (212/218, .600"/.600", 112 LSA, 3-Bolt, Made in USA), 16 Premium LS7-Style Roller Lifters with Lifter Trays, .660" Dual Valve Spring Kit with Steel Retainers, Hardened Chromoly Pushrods (7.400", 0.080" wall), Premium Valve Stem Seals, Front Timing Cover Gasket Set, 2 LS1-Style MLS Head Gaskets, and a Premium LS Rocker Arm Trunnion Upgrade Kit. Most complete TSP Stage 2 High Lift cam kit for 5.7L 4.8L and 5.3L LS cam swaps — one order one shipment zero guesswork.
HIGH PERFORMANCE CAM SPECS + DYNO PROVEN +62HP +29TQ – 212/218 Duration at .050", .600"/.600" Valve Lift, 112 LSA, 3-Bolt Pattern, 1,200–5,800 RPM Power Band. Dyno-proven gains of 62.2 HP and 29.1 TQ at the flywheel on TSP's in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine. Smooth idle that can be practically hidden with some exhaust systems — drives almost stock after proper tuning. Works with factory torque converters — the perfect sleeper cam for 5.7L LS1, 4.8L, and 5.3L LS truck builds.
16 PREMIUM LS7 ROLLER LIFTERS WITH TRAYS + 7.400" HARDENED PUSHRODS – Premium LS7-style roller lifters with lifter trays reduce friction improve oiling and stability at high RPM maintain correct cam and lifter contact patterns for longer life and simplify break-in for reliable valvetrain performance under load — the first upgrade every serious LS builder makes on any 5.7L LS1 cam swap, 4.8L sleeper build, or 5.3L lopey truck cam swap. Hardened chromoly pushrods at 7.400" length and 0.080" wall thickness eliminate flex under load — stock pushrods flex on every LS cam swap and these don't.
PREMIUM LS ROCKER ARM TRUNNION UPGRADE KIT – DO NOT SKIP THIS ON YOUR LS BUILD – The factory LS rocker arm trunnion is a known failure point across the entire LS engine family. When the factory pressed-in needle bearings fail they send small bearings through the entire engine causing catastrophic damage to your 5.7L LS1, 4.8L, or 5.3L LS build. This retrofit trunnion kit converts stock LS rocker arms into captured roller bearing rocker arms — eliminating the factory failure point entirely. Trusted in everything from stock 4.8L daily drivers to 1,000+ horsepower turbo motors.
.660" DUAL VALVE SPRINGS + STEEL RETAINERS – Purpose-matched to the TSP Stage 2 High Lift's .600"/.600" lift profile for correct spring pressure and superior valve control across all 5.7L, 4.8L, and 5.3L cathedral port LS engine families. Designed for high RPM stability these springs prevent valve float during aggressive driving while steel retainers provide a complete professional spring installation with no additional parts needed. The perfect matched spring upgrade for any 5.7L LS1, 4.8L, or 5.3L TSP Stage 2 High Lift LS cam swap build.
LS1 STYLE MLS HEAD GASKETS + FRONT TIMING GASKET SET + VALVE STEM SEALS – Two premium LS1-style Multi-Layer Steel head gaskets precision matched to the cathedral port cylinder heads found on 5.7L, 4.8L, and 5.3L LS engines — superior crush resistance and long-term sealing reliability that composite gaskets simply cannot match. Premium valve stem seals and front timing cover gasket set provide everything needed for a complete professional TSP Stage 2 High Lift LS cam swap install with nothing left out. No last minute parts store runs — everything is right here in one box.
SLEEPER CAM – REAL POWER GAINS ON EVERY DRIVE – Fire up the TSP Stage 2 High Lift and enjoy a smooth confident idle that is nearly indistinguishable from stock — until you get on the throttle. Power builds strong from 1,200 RPM through the mid-range and stays strong all the way to 5,800 RPM. Works with factory torque converters no stall upgrade needed — real performance gains on every single drive from your 5.7L LS1, 4.8L, or 5.3L LS build. Big power. Broad powerband. Built for the street.
VERIFIED FITMENT – Compatible with 1999–2013 GM 5.7L, 4.8L, and 5.3L cathedral port Vortec V8 LS cam swap engines including LS1, LR4, LM7, L59, LM4, L33, LH6, LC9, LY5, and LMG. Fits Camaro, Corvette, Firebird, Trans Am, Pontiac GTO, Pontiac G8, Silverado, Sierra, Tahoe, Suburban, Yukon, and Escalade. Please verify bolt pattern configuration prior to installation.
CAMSHAFT SPECS: