Free release agent new hand-pressed nest foundation machine in the bee bee pure beeswax glass backboard non-cement mold



New type of hand-pressed nest foundation machine

This new type of hand-pressed nest foundation machine. The material used in this product has a temperature resistance of 200 degrees and does not stick to beeswax, so it can be released directly without releasing agent. Can be really easy to remove mold, easy to clean. Please do not use hard things to touch the mold surface of the core part of this product to avoid damage.

Brushless stripping water, the size of the nest foundation is free of cutting, double-sided room eye is clear, easy stripping, 1 kg wax pressure 7~9, economic and practical, suitable for 50 swarm bees below the user

Free release agent manual press nesting machine Procedure
1. Open the base machine horizontally to ensure that there is no foreign matter on the back of the bottom mold. The back of the upper mold can be padded with a rag for easy operation, and the mold surface does not need to be brushed with any release water.
2. Pour the melted wax water evenly on the bottom mold, pay attention to the wax water temperature should not exceed 200 degrees, the recommended temperature is 80~120 degrees.
3. After pouring the wax water, while the wax water is not solidified, close the upper mold, press for about 10 seconds, and extrude the excess wax water out of the mold.

4, release the hand, wait 30 to 40 seconds,) ready to open the upper die
5, open the upper mold, do not rush to remove the mold, because the wax temperature is still relatively high at this time, you can first clean the residual wax corner

6, when the wax temperature drops to non-stick hands, choose a corner, slowly tear off the nest foundation, spread on the flat table. Ready for the next nest