Genuine Fluke Networks LRAT-1000 A1 LinkRunner AT1000 Gigabit Copper Network Auto-Tester, TruePower 25.5W PoE Verifier, Wiremap Cable Fault Locator, IntelliTone Trace, CDP LLDP VLAN IPv4 Ping Diagnostic Tool
3. Bullet Points 核心卖点
- A1 revised version of LRAT-1000, upgraded internal firmware for stable copper gigabit (10/100/1000BASE-T) testing
- One-click AutoTest finishes full network diagnosis within 10s, ultra-fast 3-second instant boot for field troubleshooting
- TruePower™ PoE load up to 25.5W (IEEE 802.3af/at), validates power supply for IP cameras, VoIP phones & wireless APs
- Complete cable diagnostic: wiremap, length measurement, locate opens/shorts/split pairs, built-in IntelliTone tone generator for hidden cable tracing
- Auto read switch data via CDP/LLDP/EDP: switch model, port slot & VLAN ID; support IPv4 ping, TCP port test & 802.1X authentication
- Store up to 10 test reports, export data via LinkRunner Manager; powered by 4×AA alkaline batteries, rugged handheld industrial shell
4. Full Product Description
Overview
The Fluke Networks LinkRunner AT1000 A1 (LRAT-1000 A1) is the revised stable iteration of classic copper network auto-tester, specially designed for IT technicians and cabling contractors. This A1 version optimizes firmware algorithm to reduce test error rates, delivering consistent, repeatable copper cable & PoE test results without fiber port function.
Single AutoTest button integrates cable integrity, Ethernet link, PoE power, switch identification and IPv4 connectivity tests, drastically cutting on-site fault locating time for office LAN, monitoring camera wiring and desktop network maintenance.
Key Functions
Copper Cable Analysis
Full wiremap detection to find open, short, crossed & split pairs; measure cable length and calculate exact fault distance. Dual-mode IntelliTone tone generator helps trace invisible wall cables.
Gigabit Ethernet & Switch Detection
Auto negotiate 10/100/1000Mbps link speed & duplex mode; fetch upstream switch information including port number, slot and VLAN through industry-standard CDP/LLDP protocols, support 802.1X secure network verification.
25.5W TruePower PoE Validation
Simulate real terminal power consumption to test PoE switch stability, monitor real-time loaded voltage and identify power supply wire pairs, avoid insufficient power breakdown of network devices.
IPv4 Network Diagnostics
Dedicated IPv4 ping test, TCP port scan, DHCP & gateway verification, no IPv6 support (reserved for LRAT-2000 model). Save maximum 10 groups of test records for later review & PC export.
Technical Specs (A1 Version)
- Display: 2.8-inch color LCD screen
- Interface: Single RJ45 copper port (no SFP fiber slot)
- PoE Standard: IEEE 802.3af / at, max 25.5W load
- Storage: 10 test reports
- Power: 4 AA alkaline batteries, 6-hour continuous runtime
- Operating Temp: 0°C ~ 45°C
- Dimension: 8.9 × 19.8 × 4.8 cm; Weight: 0.5 kg
Standard Package Contents
1 × Fluke LRAT-1000 A1 LinkRunner AT1000 Tester
1 × Soft protective carry case
1 × Test patch cord
1 × USB data cable
1 × LinkRunner Manager software CD
1 × User operation guide
On Jun 30, 2026 at 01:21:15 PDT, seller added the following information: