Descriptions
ENGMATE™ 3 Axis TB6560 Standard Driver Board Kit for CNC DIY
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This is an Electronics Kit which includes 1*3 Axis TB6560 Standard Driver Board+3*EMA172-6015S4 Nema17 97oz-in Stepper Motors+1*12V 10A Switching Power Supply
This 3 Axis TB6560 Standard Driver Board is equipped with TB6560AHQ chip. It is specially developed for all the 2 or 4 phase Nema17, Nema23, Nema24, stepper motors. It can be directly controlled by the PC via the Mach3, Mach4, EMC2, KCAM4, etc.
DIP Switch Setting
Before powering on the board, please set the DIP Switches first.
| Current Setting | SW1 | SW2 | Decay Mode Settings | SW3 | SW4 | MicroStep Settings | SW5 | SW6 |
| 100% | ON | ON | FAST | ON | ON | 1 | ON | ON |
| 75% | ON | OFF | 25% | ON | OFF | 1/2 | ON | OFF |
| 50% | OFF | ON | 50% | OFF | ON | 1/8 | OFF | ON |
| 25% | OFF | OFF | SLOW | OFF | OFF | 1/16 | OFF | OFF |
Matching Stepper Motors and Power Supply
| Model | Motor Size | Recommended Supply Voltage | Recommended ENGMATE Stepper Motors |
| TB6560 | Nema8, Nema11, Nema14, Nema16, Nema17 | 12V DC | EMA082-4208S4, EMA112-5106S4 |
| Nema23, Nema24 | 24V DC | EMA232-5615S4, EMA242-8840S4 | |
| TB6600 | Nema8, Nema11, Nema14, Nema16, Nema17 | 12V DC | EMA142-3412S4, EMA172-4016S4 |
| Nema23, Nema24 | 24V DC | EMA232-7630S4, EMA242-8840S4 | |
| Nema34 | 36V DC | EMA342-6530S4, EMA342-7842S4 |
3 Axis TB6560 Standard Driver Board
- • High performance, cost-effective
- • Manual motor control via the control panel; support tool-settings on X, Y, Z, A Axis without the computer
- • Automatic identification and intelligent switch between the computer and the control panel
- • Synchronous coordinates display on computer and display panel, up to 4 axis (X, Y, Z, A axis)
- • Real-time tracking of motor moving path
- • 1, 2, 8, 16 adjustable microstep control for more accurate and smoother motor running
- • Two-stage signal processing, smooth signal transmission
- • Automatic idle-current reduction, powerful anti-jamming capability
- • Overload, overcurrent, overvoltage, overheat protection
- • 5 types of input control on manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc.
- • 4 types of output current adjustable
- • With 0-10V PWM signal output port for speed adjustment and one relay control port
- • Compatibility with Mach3(Recommended Software), Mach4, Linux CNC (EMC2), KCAM4 CNC Software, etc.
- • Suitable for 2 or 4 phase stepper motors with rated current.
- • Aluminum & high intensity PVC Box Design for better cooling effect and item protection
Hybrid Stepper Motor (EMA172-6015S4)
- • High torque, more smooth movement
- • High efficiency, energy-saving, low noise, and low vibration
- • High start torque, low start current, and reliable performance
- • Simple 4 wires ensure easier wiring, installation, and maintenance
Switching Power Supply
- • High efficiency, high reliability, low cost
- • Adjustable ±10% Output Voltage support
- • PWM control and regulation, ensure the steady and precise output voltage
- • Over-temperature protection: built-in a powerful fan for cooling. Power on, fan on. RTH3≥85°C, output shutdown
- • Built-in EMI filter
- • 100% full load burn-in test
- • Over current, over voltage, short circuit
- • Low output ripple and yawp
Connection
The products in the wiring diagram are for reference.
Applications
Suitable for a variety of small-sized automation equipment and instruments.
- • For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc..
- • For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc..
Specifications
| Electrical Properties of TB6560 Driver Board (ambient temperature Tj = 25°C) | ||
| Version Type | 3 Axis Standard Version |  |
| Type | TB6560 | |
| Input Voltage | 12V-36V DC | |
| Output Current | 1.5A-3.5A (Peak) | |
| Drive Type | Pulse + Direction + Enable Signal Control (Bipolar constant-current PWM output) | |
| Relay | SRA-12VDC-CL 20A 14VDC 20A 125VAC | |
| Suitable Motor | Nema17, Nema23, Nema24 | |
| Weight | 700g | |
| EMA172-6015S4 Stepper Motor | ||
| Model NO. | EMA172-6015S4 |  |
| Motor Type | 2-Phase | |
| Step Angle (°) | 1.8 | |
| Rated Voltage (V) | 3.8 | |
| Rated Current (A) | 1.5 | |
| Phase Resistance (Ω) | 2.5 | |
| Phase Inductance (mH) | 6 | |
| Holding Torque (N.m/oz-in) | 0.69/97 | |
| Rotor Inertia (g. cm²) | 95 | |
| Motor Length (mm/in.) | 60/2.36 | |
| Frame Size (mm/in.) | 42/1.65 | |
| Lead No. | 4 | |
| Shaft | Single | |
| Motor Weight (kg) | 0.55 | |
| 12V 10A Switching Power Supply | ||
| Output Voltage | 12V |  |
| Output Voltage Tolerance | ±1% | |
| Rated Output Current | 10A | |
| Output Current Range | 0-10A | |
| Output Voltage Adjustment Range | ±10% | |
| Output Power | 120W | |
| Input Voltage Range | 110VAC/ 220VAC±20% (selected by switch) | |
| Input Frequency | 47~63Hz | |
| Input Current | 10A/115VAC, 5.0A/230VAC | |
| Efficiency | 85% | |
| Inrush Current | 25A/115VAC, 50A/230VAC | |
| Leakage Current | <3.5mA/240VAC | |
| Over Load Protection | 115%~135% hiccup mode, auto-recovery | |
| Over-voltage Protection | 15.6~17.8V hiccup mode, auto-recovery | |
| Over-temperature Protection | Power on, fan on. RTH3≥85°C, output shutdown | |
| Working Temperature & Humidity | -10°C~+60°C, 20%~90%RH | |
| Storage Temperature & Humidity | -20°C~+85°C, 10%~95%RH | |
| Antiknock Characteristic | 10-500Hz, 2G, 10min./period, duration 60mins | |
| Withstand Voltage | I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC | |
| Insulation Resistance | 100M ohms/500VDC | |
| Safety Standards | UL1012 | |
| EMC Standards | EN55022, Class A | |
| Weight | 600g | |
Content
Terms & Condition
| Estimated Delivery Time(Subject to Stock Availability) | ||
| USA (excl. Alaska, Hawaii, Puerto Rico) | USPS First-Class Package/ UPS SurePost/ UPS Ground | 3-7 business days |
| Other Countries (May depart from other stock location) | International Airmail Service | 12-21 business days |
Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you:
- • Need the item urgently.
- • Require that the item should be delivered within a certain time.
- • Have any other questions/requirements about delivery.
Remarks
- • Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.
- • Notification will be sent after your order is dispatched, please check your ebay order records for date of dispatch.
- • It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
- • Please contact us if you have any trouble in receiving your orders. We will help you to track them.
Safe and Easy Payment
PayPal
- • We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with NO surcharge)
-
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
- • Payment is required within 5 days after auction ends.
- • All sales are final. Shipping and handling charges are not negotiable.
- • Your PayPal shipping address will be used for delivery BY DEFAULT unless otherwise informed.
- • Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
- If you are not satisfied with the item purchased from us. Please send us eBay message within 30 days of receipt of goods for return & refund guidance.
Free Replacement
- If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
- We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
- • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
- • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.