12 inch 7 Parameters Patient Monitor with ETCO2 (No additional purchase required)
ECG/NIBP/RESP/TEMP/SPO2/PR/ETCO2
Features:
1. Unique accessory management cabinet.
2. 12.1 inch high resolution color TFT display.
3. Includes a ETCO2 sensor module; no additional purchase required.
4. Three Working Modes: Monitoring, Surgery and Diagnosis.
5. Simple and friendly operating display interface.
6. Multi-display modes suitable for different applications:
Standard Interface, Large font, ECG Standard Full Display, OXY , Trend Table, BP Trend.
7. Built-in high capacity battery up to 3 hours of continuous work
Standard Parameters:
ECG, RESP, TEMP, NIBP, SPO2, PR, ETCO2
Technique Specification:
ECG/NIBP/RESP/TEMP/SPO2/PR/ETCO2
Features:
1. Unique accessory management cabinet.
2. 12.1 inch high resolution color TFT display.
3. Includes a ETCO2 sensor module; no additional purchase required.
4. Three Working Modes: Monitoring, Surgery and Diagnosis.
5. Simple and friendly operating display interface.
6. Multi-display modes suitable for different applications:
Standard Interface, Large font, ECG Standard Full Display, OXY , Trend Table, BP Trend.
7. Built-in high capacity battery up to 3 hours of continuous work
Standard Parameters:
ECG, RESP, TEMP, NIBP, SPO2, PR, ETCO2
Technique Specification:
ETCO2
1. Monitoring range: 0% ~ 13%
2. Resolution: 1 mmHg
3. Accuracy: 2 mmHg @ < 5.0% CO₂ (at ATPS)
4. Respiration Rate: 3 - 150 bpm
ECG
1. Lead Mode: 5 Leads (I, II, III, AVR, AVL,AVF, V)
2. Gain: 2.5mm/mV, 5.0mm/mV, 10mm/mV, 20mm/mV
3. Heart Rate: 15-300 BPM (Adult); 15-350 BPM (Neonatal)
① Resolution: 1 BPM
② Accuracy: ±1%
③ Sensitivity >200 uV(Peak to peak)
4. ST measurement range: -2.0 ~ +2.0 mV
① Accuracy: -0.8mV~+0.8mV: ±0.02mV or ±10%, which is greater
Other Range: unspecified
5. Sweep speed: 12.5 mm/s, 25mm/s, 50mm/s
6. Bandwidth:
7. Diagnostic: 0.05~130 Hz
8. Monitor: 0.5~40 Hz
9. Surgery: 1~20 Hz
SPO2
1. Measuring Range: 0 ~ 100 %
2. Resolution: 1%
3. Accuracy: 70% ~ 100% (±2 %)
4. Pulse Rate: 20-250 BPM
5. Resolution: 1 BPM
6. Accuracy: 3 BPM
NIBP
1. Method: Oscillometry
2. Measure mode: Manual, Auto, STAT
3. Unit: mmHg, kPa
4. Measure and alarm range:
5.1 Adult Mode
① SYS: 40 ~ 280 mmHg
② DIA: 10 ~ 225 mmHg
③ MEAN: 20 ~ 240 mmHg
5.2 Pediatric Mode
① SYS: 40 ~ 220 mmHg
② DIA: 10 ~ 160 mmHg
③ MEAN: 20 ~ 170 mmHg
5.3 Neonatal Mode
① SYS: 40 ~ 135 mmHg
② DIA: 10 ~ 100 mmHg
③ MEAN: 20 ~ 110 mmHg
6. Resolution: 1mmHg
7. Accuracy: 5mmHg
RESP
1. Method: Impedance between RA-LL or RALA
2. Measurement Range:
① Adult: 10 ~ 120 BrPM
② Neonatal / Pediatric: 7 ~ 150 BrPM
3. Resolution: 1 BrPM
4. Accuracy: 2 BrPM
TEMP
1. Measure and Alarm Range: 0 ~ 50℃
2. Resolution: 0.1℃
3. Accuracy: 0.1℃
Standard Configuration:
Main Unit *1
ETCO2 Sensor *1
5-lead ECG cable *1
Disposable ECG Electrode *5
Adult Spo2 probe *1
Adult NIBP cuff *1
NIBP extension tube *1
Temperature probe *1
Power Cable *1
User Manual *1
Fuse *3
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food
and Drug Administration and state and local regulatory agencies.
So you can bid it on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation,We have to verify your status
as an authorized purchaser of this item before shipping of the item.
Thanks for your understanding!
The sale of this item may be subject to regulation by the U.S. Food
and Drug Administration and state and local regulatory agencies.
So you can bid it on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation,We have to verify your status
as an authorized purchaser of this item before shipping of the item.
Thanks for your understanding!
