Compatibility:

• Chevrolet Silverado 1500 2007-2022 2WD 4WD
• GMC Sierra 1500 2007-2022 2WD 4WD

Does NOT fit 2007 Classic Body model, and Silverado Trailboss / Sierra AT4 model.
NOT compatible with models using ARC (adaptive ride control) / Magneride / Auto-Ride / Air-Bag / Self-Leveling Suspension Systems.
Will NOT fit 2019+ Silverado RST or Sierra Elevation using SU4 or SU5 Differentials.
2015+ Chevy/ GMC vehicles equipped with factory stamped steel upper control arms will not support 3" or 3.5" front lift kits.
Installation of Aftermarket Uniball UCA is highly recommended on 2019+ models after lifting the front end by 2.5", or more. The upper ball joint will wear out rapidly with use of stock UCA if the front end is lifted by more than 2.5".
Z71/ LTZ have factory rear blocks - rear lift height will vary depending on factory block size being replaced.

For more details, pls check compatibility Chart.

Specifications:

Quantity: 2x Upper Strut Spacers + 2x Rear Blocks + 4x U-Bolts

Install Location: Front + Rear

Lift Height: 2.5" (2.5 inch) Front + 1" (1 inch) Rear

Material of front: Billet aluminum

Material of rear: Carbon Steel

Color: Black

About Our Products:
  The purpose of a leveling kit is to raise the front end of a truck so that it matches the stock height of the rear end, which ultimately gives you more ground clearance. Most completely stock trucks have a raked stance where the front is lower than the back by about two inches.

Features:

1. 1 Year Warranty
2. Every product is quality inspected and 100% tested
3. Built to strict quality control standards
4. Easy installation and fine parts for easy installation
5. Brand New leveling lift kit

Package:

  1x Leveling Lift Kit

What kit should I buy to level my truck?

  The ride height of each vehicle varies due to the condition and trim model of the vehicle. The most optimal way to determine which kit you require to level your truck is to park your vehicle on a level ground and take a tape-measure to measure the distance from the ground to the top center of the fender arch. Take the measurements for both the rear and front and then subtract the two numbers. This is about the amount you will need in order to perfectly level your vehicle.

How do I install this kit?

  These strut spacer kits install easily and quickly using only basic hand tools, all from the comfort of your driveway.

1. Simply unbolt/remove your factory strut assembly.
2. Install the strut spacer on top of your original strut mount, and reinstall the strut assembly.
3. Rear lift blocks simply install between your axle and OE leaf pack using our U-Bolts.

Do I Need An Alignment After Install?

  A wheel alignment is always recommended after any components of a vehicle's suspension have been altered. This includes disassembly and reassembly. Having a proper wheel alignment will ensure proper vehicle control during on and off-road driving conditions, as well as help maintain even treadwear over your expensive tire investment.

Why is the spacer in the kit that I received not the same thickness as the lift that I ordered?

  The amount advertised is the amount your truck will be raised in the front, not the spacer thickness. The spacers included in the kit is designed to work with the geometry of your suspension and give you the MAXIMUM amount of lift with minimal alterations to your ride so it will NOT affect your ride quality or overextend your suspension parts.

Attention:

1. Please read the product description carefully before purchasing, and make sure it is genuine before placing an order to avoid unnecessary returns and time waste.
2. During the purchase process, if you are not sure whether the product is what you need, or the quantity you need is greater than the displayed inventory, please contact our customer service and we will recommend suitable parts and confirm inventory for you.
3. After receiving the product, please install it in a safe place to avoid damage to the product.​​