
Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinder
To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.
1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is Cylinder tube O.D. Cylinder rod size is inside tube part size.
2. Wear rings.
Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), Nylon
Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon
3. Piston seals
1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR
4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm,TPU
Below is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:
Retracted (center to center between rod mountain hole and clevis hole: 32.4”
Extended (center to center same as above): 56.4”
Stroke: 24±0.05”
Dimension from center of clevis hole to back face of cylinder: 2.95”
Dimension from center of rod end hole to front face of rod: 1.06”
Dimension from center of rod end hole to front face of cylinder: 1.18
Ports: 1/2" NPT
Dimension from port to port: 25.4”
Rod: 1.75" rod
Rod end mountain hole: 0.55”
Clevis Mountain hole: 1.16”
Dimension between mountain clevis to clevis: 0.87”
Thickness of each mountain clevis: 0.375”
Length of each mounting clevis: 4.125”
Please note :
--- If the item cannot use or you received your item not as expected. Please let us know. You can return the item for getting a full refund. The full refund is a guarantee after the item is returned. Of course, there is no cost for you to return the item back.
---Again, If you want open an eBay return case. If it is possible, could you please help us write or select the reason for return as "change my mind " or "order by mistake" or "Doesn't fit or " Just didn't like it " . Do not worry, We do not charge anything. You still received the full refund also.
--- Please don't write or select another reason. It will affect our eBay performance. If you consider helping us, it would mean so much to us. Please consider it as a support for building up our eBay into a better community.
--- If you have any problem with your order, please contact us and we will do our best to make you satisfied.


