Features of car remore starter/turns off system:
1.Remote Start Vehicle EngineTo Cool Or Warm Your Car before Driving. it will feel more comfortable in cold winter and hot summer.
2.install Note:please ask for professional engineer for install, should put one of your remote key inside of the car when install, and it also need to welding lock. we will give 2 remote key. after install,pleasee fix it tight in case of loose.
3. Control with your our remote key(2 piece), before use it,make sure:
a. all doors, windows, trunk, engine cover must be close or locked when using remote control.
b. how to use remote start: press our remote key " unlock"button 1 time,then long press 'lock'" within about 5 seconds.
c.The air-conditioner have to be pre-set before using remote control.
4.Passive keyless entry
5.Auto windows close when locking
6.Special harness for installing
Bluetooth attached free
The device has bluetooth functioin , your phone is the key , scan the QR to down APP for Andriod
1.Push start
2.Remote start
3.Step on the brake to lock, unlock when engine off
4.Blinking turn lamp when doors opened
5.Support setting button ignition time, remote start ignition time, driving lock, double unlock, double tail box and many other functions. Our products can basically support models that cannot be installed by other products.
6.With special ignition harness ,easy to install ,reduce cut wires
7.Compatible with original alarm, rear mirror folding,auto headlight,windows closer,if install the device by soldering original remote controller
8.Bluetooth control vehicle , Your phone is your car key
9.Passive keyless entry : The vehicle automatically locks or unlocks when leaving or approaching the vehicle with the key
Why choose our products ?
1. Easy to install, with special ignition wire to minimize wire cut.
2. Control signals such as central lock, trunk and horn, all support 10A big current positive or negative output options, and the installation is suitable for many vehicles.
3. It supports soldering the original remote controller to unlock, lock, open trunk and other functions. If the vehicle that the central locking is not easy to install (for example: the central locking system controlled by the same button), you can use it soldering the remote for processing.
4. Support automatic window-closing or rear-view mirror folding function (the original vehicle must already have these functions , and the original remote may need to be soldered)
5. Support instantaneous powering on the vehicle before unlock, to solve that the central lock cannot unlock after the original car anti-theft is automatically activated.
6. When installing with the original soldering remote control, there is no need to connect the direction lamp wire and the trunk wire, which is easy to install, and can retain the original car anti-theft function, automatic rearview mirror folding, automatic headlights and other functions.
7. There are many shape options for the remote control, which can remoe start/stop the engine.
8. The control host can set the remote start ignition time (1.0 or 2.0 seconds) by our remote , and the automatic flameout time (10 or 20 minutes )after the remote start, to fit normal ignition under different temperatures in cold and hot days.
9. With communication port, it can be connected with our APP control module to remote unlock, lock, open trunk, find car, remote start/stop, and GPS locate the vehicle.
Special design for easy installation
1. Very simple installation , No need cut any wires for connecting or only connect foot brake wire:
1.1 To connect ignition wires and Ground with special harness, then soldering the original remote controller ,and put it nearby the coil of key for unlock immobilizer. Our device will control original remote controller to do lock, unlock and open trunk.
1.2 Push start: it can do push start/off by press the button 2 seconds if didn’t connect foot brake wire
1.3 remote start on/off : press and hold lock button 3 seconds to do remote start, when the engine start , it can’t unlock or lock , because the original remote controller can’t control the vehicle when engine start. So there are two options for choice: 1. default setting : don’t unlock before remote start, so the doors is locked after remote start, it need use key blade to open the door . 2. unlock before remote start, so the doors isn’t locked. These two options can be set by user ,please refer to the setting options .
1.4 All of these two options, it need do unlock by remote controller or APP after remote start, otherwise it will turn off engine automatically after 20 minutes.
1.5 This method is with good compatible with original alarm, automatic head light, folding rear mirror etc.
2. Simple installation method: (recommend)
2.1To connect ignition wires and Ground with special harness, then soldering the original remote controller ,and put it nearby the coil of key for unlock immobilizer. Our device will control original remote controller to do lock, unlock and open trunk.
2.2 To connect foot brake, horn, lock and unlock wires,for this installation , it can unlock and lock after remote start 。
2.3 This method is with good compatible with original alarm, automatic head light, folding rear mirror etc.
3. The normal connection method, do not soldering the original car remote controller, To connect ignition wires and Ground with special harness, then connect foot brake, horn, lock , unlock ,trunk and two direction lamps .for this installation , it can unlock and lock after remote start 。
This link has a normal start/stop button , If you need drill hole start/stop button , please check another link on our store.
One year warranty, New spare parts replaces free