--CV Axle Shaft--High Performance

Tips1:When do you need to replace the axle?

1:A "clicking" sound or knocking sound when turning
While it's sometimes described as a loud click and sometimes as a bang, once you hear it, the sound is unmistakable. It presents itself when you steer the vehicle and it is due to loose joints in the worn CV axle and the best thing to do is to have the problem checked by an expert immediately.

2. There is grease on the inside or edge of the tire
The shoe of the CV shaft joint contains grease to prevent it from leaking as the shaft rotates. If the starter develops a leak, the resulting lack of lubrication can quickly cause the CV joint to fail.

3. Vibration while driving
This is a tricky question because there are many things that can cause vibrations when you drive. However, if the vibration is excessive, increases speed, or gives your drive an unusual "bouncy" feel, it may be due to the CV shaft. Whatever the cause of the vibration, it's important to have your vehicle inspected; if it's vibrating too much, it can become difficult to control.

Tips2:How To Buy The Suitable Axle?

Note1: Check the vehicle year, brand, model and installation location in our store.Compare whether the original axle of your car are the same as our products. Do the details match?

Note2:If you are unsure, please contact us via eBay message and provide the year, make and model of your vehicle. Let us know which products you are interested in so we can check the accessories and get back to you as soon as possible.

Tips3:How To install The Suitable Axle?

Step1:Confirm whether the axle needs to be replaced.
Step2:Remove the main shaft and replace the faulty axle.
Step3:Tighten all fibers to factory specifications.
Step4:Top up the missing transmission fluid.Check tire pressure.
Step5:Carry out road test.

Professional installation is highly recommended!