New 4x Tire Pressure Sensor For 20-23 Ford Escape Lincoln JX7Z-1A189-C TPMS-60
 
Product Description
-- Set of Four (4) 315 Mhz & 433MHz Tire Pressure Sensors (TPMS)
-- Part Number: JX7T-1A180-AA, JX7Z-1A189-C, TPMS60
-- Condition: Brand New , Generic Packaging
-- Other Info: 315MHz & 433MHz Dual Frequency
 
This item will fit the following vehicles / applications:
🚗FOR 2020 Ford Escape
🚗FOR 2020 Ford Explorer
🚗FOR 2020 Ford Police Interceptor Utility
🚗FOR 2020 Ford Transit 150
🚗FOR 2020 Ford Transit 250
🚗FOR 2020 Ford Transit 350
🚗FOR 2020 Lincoln Aviator
🚗FOR 2020 Lincoln Corsair
 
Features:
【Easy to Install and Relearn】TMPS sensors kit had pre-programmed for your vehicle the same as factory, the tire sensors fit for Ford are manufactured to OEM specification, You can DIY or to professional tire shops, just follow car manufacturers instructions to turn off and on, relearning, programming, activation and running.
【Long Lasted Battery】TPMS Sensor is upgrade with an powerful automotive-grade battery for long last 5-8 years or 90000-120000 kilometers, the tire pressure sensors for Camry operating temperature range to -40℃～+120℃ ensure the safety during you driving in every conditions.
--It can precisely measure the tire pressure, provide the driver with accurate tire pressure information, and promptly detect the subtle changes in tire pressure.
--It continuously and real-time collects tire pressure data and promptly transmits the information to the vehicle control system or display device, allowing the driver to always keep track of the tire condition.
--Not only can it monitor the tire pressure, but it can also monitor the tire temperature in real time, which helps to detect potential risks caused by overheating of the tires in advance, ensuring driving safety.
--It operates stably at high speeds, even when the vehicle is in a high-speed driving state, it can work stably and continuously monitor and transmit tire pressure data.
--By keeping the tires working at the appropriate tire pressure, it effectively reduces tire wear, prolongs the tire service life, and lowers the tire replacement cost.
 
Package Include:
4 x TPMS(Tire Pressure Monitoring Sensor)
 

Optimized Installation Process:

  1. Deflate the Tire:
    Remove the valve cap and core to fully deflate the tire.

  2. Dismount the Tire:
    Secure the tire onto the tire changer and position the valve at the 1 o’clock position relative to the tire separation head. Use a tire tool to lift the bead over the mounting head and dismount the tire.

  3. Remove the Sensor:
    Using a screwdriver, remove the fastening screw and sensor from the valve stem. Then loosen the nut and completely remove the valve.

  4. Install the Sensor and Valve:
    Insert the valve stem through the valve hole on the rim. Secure the screw-nut with a torque of 4.0 Nm using a positioning pin for alignment. Attach the sensor body against the rim and tighten the mounting screw.

  5. Mount the Tire:
    Position the tire onto the rim, ensuring the valve is oriented 180 degrees opposite the separation head. Carefully seat the tire bead over the rim edge.

On Mar 23, 2026 at 15:50:52 PDT, seller added the following information:

Datacaciques