Features:
*for 8 Inch: Use for Band Saw Wheel diameter 205 mm, advice bandsaw blade length is 1425 mm.
*for 9 Inch: Use for Band Saw Wheel diameter 230 mm, advice band saw blade length is 1570 mm.
*for 10 Inch: Use for Band Saw Wheel diameter 250 mm, advice band saw blade length is 1826 mm.
*for 12 Inch: Use for Band Saw Wheel diameter /317 mm, advice band saw blade length is 2240 mm.
*for 14 Inch: Use for Band Saw Wheel diameter 350 mm, advice band saw blade length is 2560 mm.
*In order to for ensure that the anti-skid rubber for ring can be tightly combined with the outer edge of the wheel, and avoid slippage and insufficient cutting force due to loose rubber for ring, the circumference of all anti-skid rubber rings must be smaller than the circumference of the band saw wheel.
*The rubber for ring has good wear resistance and toughness, that it is not easy to break and loosen after installation.
Installation method:
. Remove the damaged rubber for ring. If there is rubber for ring on the outer edge of the wheel, please clean up the first.
2. Soak the new anti-skid rubber for ring in warm water for 3-5 minutes, and install it after the rubber for ring is softened.
3. When installing, start from side of the wheel, press end of the rubber for ring firmly into the groove on the outer edge of the wheel, and then use a flat-blade screwdriver to slowly pry the rubber for ring into the groove on the outer edge of the wheel. Do not use too much force. It is so violent that the rubber for ring is damaged.
4. If necessary, you can place a few drops of glue along the grooves on the edge of the wheel to for ensure a more secure installation.
Specifications:
Product Name: Band Saw Rubber Band
Material: Rubber
Color: Black
Optional Size: for 8 Inch, for 9 Inch, for 10 Inch, for 12 Inch, for 14 Inch
for 8 Inch: 8" x / for 2" x 0.12" (205 * 12.7 * 3mm)(Approx. )
for 9 Inch: 9" x / for 2" x 0.12" (230 * 12.7 * 3mm)(Approx. )
for 10 Inch: 10" x / for 2" x 0.12" (250 * 12.7 * 3mm)(Approx. )
for 12 Inch: 12" x 3/4" x 0.12" (317 * 20 * 3mm)(Approx. )
for 14 Inch: 14" x " x 0.12" (350 * 24.5 * 3mm)(Approx. )
Suitable for: WoodWorking Band Saw
Quantity: 2Pcs
Package Included:
2 × Band Saw Rubber Band
Note:
.Transition: 1cm=10mm=0.39inch.
2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
3. Please allow slight manual measurement deviation for the data.
4.Please after receiving the goods, put them in hot water and heat them to spread evenly.
