eBay

RELEASE THE KRAKEN

Kraken is fully sealed, closed emitter dot sight optimized for defensive and law enforcement use on pistol and long gun applications.

Compared to open emitter reflex sights, sealed systems like Kraken are tougher and easier to keep clean and functional in extreme conditions such as immersion in water or mud.

Kraken features 3 MOA dot available in Red and includes battery-saving Shake n' Wake technology.

Feature include:

3 MOA Dot, powered by CR2032 3V battery.

8000+ hours continuous battery life / 20000+ hours with Shake n' Wake use.

Motion sensing "Shake n' Wake" auto-on / auto-off reticle illumination.

7075-T6 aluminum construction and hardcoat anodized finish.

Inserting & Changing the Battery:

Kraken uses a CR2032 3V battery which is included in the box but not pre-inserted into the optic.

1. Turn the battery cover counter-clockwise to remove it.

2. Insert the battery with the "+" side facing away from the scope body.

3. Turn the battery cover clockwise to close it.

4. Tighten until snug and no farther, there is no need to torque down on a battery.

5. Confirm that the optic powers on by pressing the brightness UP button.

6. Regardless of how often you are using Kraken, we recommend you replace your battery annually.

POWER & BRIGHTNESS

On / Off

Press the brightness UP "▲" button to power on.
Hold the brightness DOWN "▼"button for 3 seconds to manually power off.
When the sight is powered back on it will automatically return to the previous brightness level.

BRIGHTNESS

Kraken is equipped with 10 brightness settings. The two lowest settings are passive aiming compatible with night vision devices.
Use the brightness UP"▲" and brightness DOWN "▼” buttons to adjust brightness level.
When using low brightness settings ensure sufficient contrast against thetarget.
Medium brightness settings are ideal for indoor shooting ranges.
The highest two brightness settings are daylight bright and should only be usedin very bright conditions, Using these settings in darker conditions will cause unwanted glare and reticle bloom.

SHAKE 'N WAKE

After approximately four minutes without sensing movement, Kraken will shut off illumination to save battery life. While “asleep" the battery will draw no power. As soon as movement resumes, the optic will immediately “wake" and resume its previous brightness level.
Kraken does not incorporate a timed fully-shutdown feature that requires the user to press a button to wake.
Shake 'N Wake is seamless and intended to be unobtrusive to the user. itis not a mode that can be activated and deactivated, it is hard wired into the function of the optic.
Shake'N Wake is very sensitive to movement. While wearing a pistol with Kraken mounted, even the body movement of normal breathing is sufficient to keep the optic “awake" and drawing battery power. Kraken must be absolutely still for four minutes before the Shake 'N Wake system will shutoff illumination.

MOUNTING

Closed emitter systems like Kraken cannot mount directly to optic footprints featuring vertical screws to clamp the scope body in place. Because Kraken's body is completely sealed and nitrogen purged, it features two horizontal screws underneath clamping from the side. These two screws travel through two recoil lugs aligning with slots cut in Kraken's adapter plates. The twin recoil lug arrangement reduces screw stress on reciprocating pistol slides compared to open emitter reflex optics.

Swampfox recommends applying blue threadlocker to all Kraken system screws and torquing them to 10-15 inch pounds. Attach the adapter plateto the optic footprint with the included screws, then attach Kraken to theadapter plate.

Three sets of screws are included in the box:

#6-32, for use with the RMR footprint adapter on pistol slides
M3, for use with the MOS slide adapter
M3.5, for use with the RMR footprint adapter on Rebel Riser and Rebel Offset mounts

RETICLE & ZEROING

Kraken features a 3 MOA dot reticle. Krakens with a red emitter will feature a ruby red coating on the interior lens. Krakens with a green emitter will feature a silver coating on the same lens. Kraken features 1MOA-per-click windage and elevation adjustments, with point of impactdirection indicated on the scope body.

One Minute of Angle is equivalent to approximately 1" at 100 yards, or .75” at 75 yards, .50” at 50 yards, etc.

PARALLAX

Kraken is designed to be parallax free at 33 yards. At distances closer than 33 yards, parallax error is very minimal and will not lead to appreciable point of impact shift. At distances past 100 yards, some parallax will be observed, When using your sight at close range, keep in mind that the entire window is available for aiming. lf you can perceive the reticle anywhere in the window, you can use it as a point of aim. For shooting past 100 yards, keeping the reticle more centered in the window will result in more consistent hits on target.

Maintenance

Before cleaning your optic lens, make sure to blow away any dust or grit on the lens to prevent the lens from being scratched while cleaning. Always use a soft cloth when cleaning your lens.

SPECIFICATIONS

Device Type: Closed Emitter Dot Sight

Optical Magnification: 1X

Windage and Elevation Range: 90 MOA

Eye Relief: Unlimited

Battery Type: CR2032 3V

Dot Size: ЗMOA

Shockproof: 1500G

Scope Body: Matte Black Hardcoat

7075-T6 Aircraft Grade Aluminum

Optical Coating: Fully Multi-Coated

Weight: 2.4 Ounces w/o Battery

Working Temperature: -4°F to +140°F

Dot Brightness: 10 settings, 2 NV

Water resistance: IPX7,up to 1 Meter

Dimensions: 1.86"X 1.4" X 1.2”

Battery life: 850 Hours @ Brightest Level

8100 Hours @ Medium Level

9000 Hours @ Lowest Level

Approx. 2 Yr Real Worid [Shake'N Wake]

Item Includes:

1x Kraken Red Dot Sight
1x CR2032 Battery
1x Cleaning Cloth
1x Adjusting "I" shaped Screw
1x Adjusting "L" shaped Screw
1x MOA Plate
1x RMR Plate
4x #6-32 EF 5.1mm screws
4x M3x0.5 EF 5.5mm screws
4x M3.5x0.6 EF 5.1mm screws
1x User Manual
1x Swampfox Sticker

Shipping Policy:
- Our products are located in Kentucky, USA. The products are located in the United States and are shipped from there.

- We use the official eBay Fulfillment Channel. This channel will automatically fill in the tracking number 10 minutes after you place the order. This means that the eBay Fulfillment Channel has accepted the order and the items are ready to be dispatched from the warehouse.

- We use USPS or UPS/Fedex SmartPost services. The delivery time should be 3-7 working days, depending on your location and the distance from Kentucky. For example, shipping to Indiana takes 3 working days, while shipping to California takes 6-7 working days.

- If you want to cancel the order after it is placed. Please complete it within 8 minutes. Otherwise, once eBay fills in the tracking number, there is almost no chance to cancel the order except for delivering the order to you. However, if you really want to cancel, you can still return the package intact after receiving it.

Return Policy:

- We accept return at our cost within 30 days. Please contact us before you wish to return an item. If an item is defective, it may happen from time to time, we will evaluate the case scenario and we may refund you in full without you returning the item. Pictures of the item being defective or broken has to be provided before we can full refund.

- When a return has been started, we will upload a prepaid label to the returning page. You can use that label we uploaded to ship the item back to us.

- Refund amount will be adjusted if the item is used, missing parts, wrong item returned. We may deduct up to 100% if any of these situation occur.

- We encourage you to contact us before you return an item.

Customer Service:
- We are committed to provide the customer with best service possible. We will reply your message if you leave us any within 12 hours on business days.

-If you have any questions regarding an item, a return request or a general question, please do not hesitate to hit Contact seller and leave us a message.

DataCaciques