A high concentration, acid based cleaner formulated to remove unsightly stains caused by numerous every day occurrences, as well as builders splatter.

Features & Benefits

§  Powerful acid cleaner

§  Increases durability

§  Double strength

§  For exterior applications

§  Removes stubborn mortar stains from brickwork, paving and tiles

Uses

For removing cement and mortar splashes, light oil stains and grease from brickwork, paving, tiles, earthenware and concrete. Bond It HIGH STRENGTH BRICK ACID should not interfere with the various types of concrete and stone (except limestone and marble) commonly encountered in the general building area. Efflorescence can also be removed by using this product diluted.

Limitations

Not for sale to the general public, unless they hold an EPP licence. Do not use Bond It HIGH STRENGTH BRICK ACID on limestone or marble as the chemicals will attack the surface. This product can also have an adverse effect on coloured concrete, test an inconspicuous area before use.

For removing mould, lichen or mildew, Bond It MOULD STOP or PATIO BLASTER should be used. HIGH STRENGTH BRICK CLEANER and its fumes will attack limestone, marble stainless steel and aluminium. If used internally extreme care should be used and thorough ventilation provided. Do not allow product to come into contact with metals such as steel, copper, aluminium and titanium. If used internally, extreme care must be taken and thorough ventilation provided as fumes can cause damage to sensitive surfaces.

Application

Gloves, overalls, boots and goggles should be worn at all times during application. Protect metal surfaces and paint-work before application with polythene sheets and tape. Remove excess dirt, mortar, etc. with a stiff yard brush. If cleaning down brickwork saturate area with water to prevent damage to mortar. Before commencing a full clean down, test on an inconspicuous area with Bond It HIGH STRENGTH BRICK ACID diluted 4:1, water to cleaner. DO NOT ADD WATER TO NEAT CLEANER, ALWAYS ADD THE CLEANER TO THE WATER. For normal use dilute between 2 and 4 parts water to 1 part cleaner. Apply using a brush and allow to stand for 10-15 minutes ensuring the area does not dry out and is scrubbed occasionally with a stiff yard brush. Rinse thoroughly with large amounts of water. If stains persist, repeat the process and/or use the cleaner undiluted taking care to test the neat cleaner first on an inconspicuous area. For removing efflorescence use a 8:1 dilution water to cleaner. Always use a plastic container for diluting this product. Do not allow the cleaner to come into contact with metals such as steel, copper, aluminium and titanium.

Health & Safety

Please refer to separate safety data sheet (SDS) for full handling, use and storage instructions. Keep out of reach of children. It is the  user’s responsibility to determine suitability for use. If in doubt, contact our Technical Department for advice.

Storage Conditions

Store in cool, dry conditions in a sealed container between temperatures of +5 and +30oC. Keep away from children. Store away from alkaline products and bleach. Protect from frost.

Colour

CLEAR LIQUID

Size

5 LITRES