Rub the top of the sticker — Place it face down on a flat surface and firmly rub the transfer tape (with a credit card or your fingers) to ensure the sticker fully adheres to the tape and separates easily from the backing.Clean the surface — Wipe thoroughly with rubbing alcohol or soap/water. Let it dry completely—no dust or oils.Position the sticker — Hold it up (with backing and transfer tape still on) to align. For precision, use masking tape as a hinge on one edge.Peel the backing — Slowly peel off the paper backing, exposing the adhesive. The transfer tape holds the design together. (For large stickers, peel half, apply that side, then the rest.)Apply the sticker — Press down from the center outward. Smooth with a credit card or squeegee to remove bubbles.Remove transfer tape — Peel it off slowly at a sharp (180°) angle. If parts lift, press back and rub more.Final press — Rub firmly over the sticker for full adhesion.