Features:
1. Metal gears
The spiral gear is made of high-grade alloy steel containing molybdenum, with a precision of up to IT5-6 level, and is wear-resistant without tooth breakage.
2. All copper coil
Pure copper coil, fast heat dissipation, with a lifespan 10 times longer than ordinary lifespan. H grade (180 ° C) enameled wire and insulation material, with a large safety margin.
3. Cooling fan
The connection of the fan to the rotor tail effectively provides heat dissipation for the motor's operation and prolongs its service life.
4. Precision stator
Adopting low loss silicon steel sheets and precision integrated stamping technology, the iron core has high precision, good magnetic conductivity, low noise, and smooth operation.
5. Speed control feedback device
Effectively control the rhythm of the rotation speed, with no slip loss, high mechanical performance, and good stability.
Specifications:
Voltage: 110V/220V/380V
Power: 60W
Speed ratio:3/5/10/15/20/30/40/60/100/120/150
Dimension: See pictures
Package included:
Motor+ Gear box+ Governor
Note:
1. Regarding the rotational speed:
When the speed regulating motor is unloaded, the motor can be infinitely regulated, and the speed can be slowed down from the maximum speed to 0. However, when the motor is installed with equipment and loaded, please pay special attention to:
a. When the load is small and the motor is not working continuously for a long time, the speed controller shall not be adjusted below 50% of the full speed.
b. When the load is large and the motor operates continuously for a long time, the speed controller must not be adjusted below 70% of the full speed.
2. Regarding power: Based on the selected speed, torque, and shaft force, the power is determined. Choose a higher power instead of a lower one
3. Selection of rotational speed
Final output speed of deceleration motor=motor speed ÷ reduction ratio
The slower the speed of the deceleration motor through the gearbox without speed regulation, the greater the torque. The slower the speed regulated by the speed controller, the more the torque will sharply decrease.