Suction filter for 10 mesh Graco piston unit, Rosfix Tornado RTR5

✅ Fits Graco Models: Ultra Max 795/1095/1595, GMax 3900/5900, Lo-Boy, High-Boy, LineLazer 3900/5900, EM 590, Ultra 750/100/1500, GM 3500/5000, Ultra 333/433, GM 7000 Lo-Boy, LineLazer 5000, Rosfix RTR5

✅ Protection from dirt: Filters prevent dirt from entering the spray system, minimize the risk of nozzle clogging and optimize surface quality

✅ Three stages of filtration: Inlet screen, pump filter, gun filter - each with different mesh sizes, ensure optimal filtration of the material

✳️ Specifications:

✔️ Internal Thread: 31.7mm

✔️ Graco Compatible Models: Ultra Max 795/1095/1595, GMax 3900/5900, Lo-Boy, High-Boy, LineLazer 3900/5900, EM 590, Ultra 750/100/1500, GM 3500/5000, Ultra 333/433, GM 7000 Lo-Boy, LineLazer 5000

✔️ Mesh Size: 10 stitches for high viscosity materials

Ideal for ensuring the highest spray quality and longevity of your equipment.

✳️ Compatible with Graco Devices:

ST Max 395 / 495
ST Max 390
ST Max 490
Ultra 395 / 495 / 595
Ultra Max 695 Lo-Boy
G Max 3400
LineLazer 3400

✳️ Choice of nozzle openings for different types of spray material:

✔️ Pigments: 0.009′′

✔️ Stains, Varnishes, Oils: 0.009′′ - 0.011′′.

✔️ Primers: 0.013′′.

✔️ Urethanes, Epoxies: 0.013′′ - 0.015′′.

✔️ Paints, Emulsions: 0.015′′.

✔️ Acrylates: 0.015′′ - 0.019′′.

✔️ Latex: 0.017′′ - 0.019′′.

✔️ Exterior Colors, Facade Colors: 0.021′′ - 0.029′′.

✔️ Waterproofing Coatings: 0.023′′ - 0.031′′.

✔️ Multi-color paints for construction: 0.023′′ - 0.031′′.

✔️ Fire Retardant: 0.029′′ - 0.035′′.

✔️ Elastomers: 0.025′′ - 0.033′′

✔️ Smoothing Filler: 0.027′′ - 0.035′′.

✔️ Bitumen Masses: 0.055′′ - 0.065′′.

✅ Choosing the right nozzle is a breeze with us! Here are some steps to help you decide:

1️⃣ The first digit (A) gives the width of the nozzle jet on, we refer to it as "A". If you multiply the first digit "A" by 5 cm, you get the desired beam width by holding the gun 30 cm away from the surface. Mathematically, this can be expressed as follows:

Spray Width = A x 5cm

Example: If the first digit of "A" is 5, the spray width: A Width of spray jet = 5 x 5 cm = 25 cm

This means that if the gun is held 30 cm away from the surface, the result is a spray width of 25 cm.

2️⃣ The Last Two Numbers (B) - indicate the size of the nozzle opening and the density of the paint. The higher the number, the denser the color. For example, "517" is a nozzle with a spray width of 25 cm and a nozzle bore diameter of 0.017 inches.