➤Please Note:
-
Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case.
➤After service Notification:
-
It is impossible for any product to be 100% suitable for all types of vehicles, and our products can be suitable for 99% of all types of vehicles.If you are satisfied with our product and service please leave us a positive feedback,if there is any problem when you received the package,before leaveing neutral / negative feedback please feel free to contact us,we will be definitely give you a satisfying solution.
SOME PROBLEMS FROM CUSTOMERS:
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Q2: Both side flicker/interference/error light?
1. For Dodge, for Jeep, for Chrysler etc, after install our Headlight bulbs, if the bulb flicker or have error code, you can buy a decoder resistor to solve it.
2. For some vehicles, the high beam and DRLs share the same bulb, so the DRLs might have compatible issue after installing, you can try the decoders to fix.
3. It is not recommended to install the item on vehicle headlight with projector lens, lens lose brightness.
1. For Dodge, for Jeep, for Chrysler etc, after install our Headlight bulbs, if the bulb flicker or have error code, you can buy a decoder resistor to solve it.
2. For some vehicles, the high beam and DRLs share the same bulb, so the DRLs might have compatible issue after installing, you can try the decoders to fix.
3. It is not recommended to install the item on vehicle headlight with projector lens, lens lose brightness.