There is a film on the prewired loaded pickguard to prevent scratches and damage.

Please remove the film before installing loaded strat pickguard on your guitar.



Product Description

Model: HHH Strat Pickguard

DC resistance (approx.):

Neck Humbucker: 7.5K (splitting coil 3.75K)

Middle Single Coil: 7.5 K(splitting coil 3.75K)

Bridge Humbucker: 15K (splitting coil 7.5K)

Hole spacing N:50 mm M:50 mm B:52 mm

Humbucker four conductor wires: black wire is hot, green wire is ground, red and white is for splitting coil

Material: PVC pickguard and copper coil Pickup

Weight: 700 grams per set

Accessories: 11 screws

Tip: Please check the pickguard size chart carefully before purchasing to make sure the hole pattern is compatible with your pickup, or be prepared to make any necessary adjustments!



Compatibility:

Suitable for most Fender (FD) guitars.

Installation Difficulty: Rated as very easy to install.

Weight: 700 grams per set.

Accessories Included:

1 x 3-ply guitar pickguard

3 x Alnico 5 humbucking pickups

1 x 5-way switch

1 x Enhanced switch

3 x Potentiometers (1 volume, 2 tone, copper shaft)

4 x Single Cut Toggle Switches

1 x 400V/200V Capacitor

1 x Output Jack

11 x Screws



In addition to the original function, the two single-cut toggle bring new functions, as follows.



1.When the Multi switch toggle (first toggle) is on, the neck pickup is active regardless of the setting on the 5-way.

for example, toggle on + 5-way at the bridge = neck and bridge pickup work together.

2. Bridge Pickup have single-cut (Push-Pull) switch (second toggle). After turning on the single-cut switch, you will getdifferent tone, Double coil pickup will change to single coil pickup tone, the feature will be powerful.